Kitchen Installers UK

Cooker hood installation · Greater London

Cooker hood installation in Uxbridge

Need cooker hood installation in Uxbridge? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.

Guide price£160 to £1,200
Postcodes includeUB8
Timescale3 to 7 hours for most hoods
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

When does cooker hood installation make sense in Uxbridge?

A new kitchen in an Uxbridge home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

Cooks across Greater London who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We cover all of Uxbridge, including the UB8 postcode district, and travel out to neighbouring towns across Greater London.

What does the job involve?

After the survey visit we write the scope down. For cooker hood installation in Uxbridge it usually covers:

  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Core drilling through the outside wall and an external grille fitted and sealed
  • Power supply connected by an electrician and tested to BS 7671
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
  • Survey of the hob position, duct route, outside wall and any open-flued appliance
  • Recirculating hoods fitted with carbon filters, and their limits explained

How much does cooker hood installation cost in Uxbridge?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

How much does cooker hood installation cost in Uxbridge?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Uxbridge homes

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Uxbridge

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

  • Check whether your Uxbridge home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
  • Before choosing a hood for your Uxbridge kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
  • If your Uxbridge home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
  • Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Uxbridge

How much does cooker hood installation cost in Uxbridge?

Cooker hood installation in Uxbridge typically costs £160 to £310 including VAT for a like-for-like cooker hood swap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Uxbridge?

Yes. We work across Uxbridge, including the UB8 postcode district, and nearby towns such as Ruislip and South Ruislip. Book a free survey visit and we will arrange a time that suits you.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Cooker hood installation near Uxbridge

Neighbouring towns where we offer cooker hood installation:

Combine cooker hood installation with other work

Free survey visit

Book a free survey visit in Uxbridge

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price