Cooker hood installation · Kent
Cooker hood installation in Swanscombe
We take on cooker hood installation in Swanscombe and the surrounding DA11 postcodes, working to a written scope so you know exactly what is included before anyone starts.
Why cooker hood installation for a Swanscombe home?
A new kitchen in a Swanscombe home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.
If condensation runs down the windows of your Swanscombe kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. We cover all of Swanscombe, including the DA11 postcode district, and travel out to neighbouring towns across Kent.
What does the job involve?
Here is what usually goes into cooker hood installation, adjusted to your Swanscombe kitchen after we have measured it:
- Hood fixed at the height set by the hood and hob manufacturers
- Short, straight runs of rigid ducting wherever the route allows
- Core drilling through the outside wall and an external grille fitted and sealed
- Power supply connected by an electrician and tested to BS 7671
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Island and ceiling hoods fixed into the ceiling structure by two people
How much does cooker hood installation cost in Swanscombe?
Typical cooker hood installation prices for homes in Swanscombe, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
What kind of kitchens do we fit in Swanscombe?
Typical homes in this part of Kent include Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.
Do you need approval for cooker hood installation in Swanscombe?
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Tips before you start
- Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
- For an island hood in your Swanscombe kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
Questions about cooker hood installation in Swanscombe
How much does cooker hood installation cost in Swanscombe?
For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Swanscombe. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you work near Swanscombe as well?
Yes. As well as Swanscombe itself, we cover the rest of Kent and nearby towns such as Grays and Gravesend. The process is the same wherever the kitchen is.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Nearby places we cover
Neighbouring towns where we offer cooker hood installation:
- Cooker hood installation in Grays
- Cooker hood installation in Gravesend
- Cooker hood installation in Longfield
- Cooker hood installation in Dartford
- Cooker hood installation in Hartley
- Cooker hood installation in South Ockendon
- Cooker hood installation across Kent