Cooker hood installation · Kent
Cooker hood installation in Dartford
Homeowners and landlords in Dartford can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.
Thinking about cooker hood installation in Dartford?
If condensation runs down the windows of your Dartford kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.
If your Dartford house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Kitchens in every part of Dartford are covered, and the survey visit is free wherever you are in Kent.
What does the job involve?
Here is what usually goes into cooker hood installation, adjusted to your Dartford kitchen after we have measured it:
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Hood fixed at the height set by the hood and hob manufacturers
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
How much does cooker hood installation cost in Dartford?
The figures below are guide prices for Dartford, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
What kind of kitchens do we fit in Dartford?
Typical homes in this part of Kent include Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.
What rules apply to cooker hood installation in Dartford?
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Getting the most from your cooker hood installation
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- If you live in a flat in Kent, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
- If your Dartford home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Questions about cooker hood installation in Dartford
How much does cooker hood installation cost in Dartford?
Guide prices in Dartford are about £140 to £280 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Dartford before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Dartford. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Also covering nearby towns
Close to Dartford? We cover these nearby towns too:
- Cooker hood installation in Bexley
- Cooker hood installation in Swanley
- Cooker hood installation in Swanscombe
- Cooker hood installation in Welling
- Cooker hood installation in Longfield
- Cooker hood installation in South Ockendon
- Cooker hood installation across Kent