Cooker hood installation in Edenbridge

Why cooker hood installation for an Edenbridge home?

If condensation runs down the windows of your Edenbridge kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

Cooks across Kent who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. Kitchens in every part of Edenbridge are covered, and the survey visit is free wherever you are in Kent.

What is in a typical job?

Here is what usually goes into cooker hood installation, adjusted to your Edenbridge kitchen after we have measured it:

Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Power supply connected by an electrician and tested to BS 7671
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Recirculating hoods fitted with carbon filters, and their limits explained
Short, straight runs of rigid ducting wherever the route allows

What does cooker hood installation cost in Edenbridge?

The figures below are guide prices for Edenbridge, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does cooker hood installation cost in Edenbridge?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Edenbridge and what they mean for a kitchen

Typical homes in this part of Kent include Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Do you need approval for cooker hood installation in Edenbridge?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Worth knowing before the fit

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
If you live in a flat in Kent, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Edenbridge

How much does cooker hood installation cost in Edenbridge?

For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Edenbridge. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Edenbridge as well?

Yes. As well as Edenbridge itself, we cover the rest of Kent and nearby towns such as East Grinstead and Sevenoaks. The process is the same wherever the kitchen is.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

Close to Edenbridge? We cover these nearby towns too: