Cooker hood installation · Wiltshire
Cooker hood installation in Salisbury
Whether your Salisbury kitchen is a narrow galley or an open-plan room, cooker hood installation follows the same careful order: survey, written scope, fit and a final check together.
When does cooker hood installation make sense in Salisbury?
Homeowners in Salisbury adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.
If your Salisbury kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. Kitchens in every part of Salisbury are covered, and the survey visit is free wherever you are in Wiltshire.
What we cover for cooker hood installation in Salisbury
Here is what usually goes into cooker hood installation, adjusted to your Salisbury kitchen after we have measured it:
- Core drilling through the outside wall and an external grille fitted and sealed
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Short, straight runs of rigid ducting wherever the route allows
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
How much does cooker hood installation cost in Salisbury?
As a starting point for Salisbury, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£250 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £310–£930 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £310–£650 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£310 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
House types around Salisbury and what they mean for a kitchen
Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.
Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.
Do you need approval for cooker hood installation in Salisbury?
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.
Getting the most from your cooker hood installation
- If you live in a flat in Wiltshire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
- For an island hood in your Salisbury kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Questions about cooker hood installation in Salisbury
How much does cooker hood installation cost in Salisbury?
For a like-for-like cooker hood swap, budget around £120 to £250 including VAT in Salisbury. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you work near Salisbury as well?
Yes. As well as Salisbury itself, we cover the rest of Wiltshire and nearby towns such as Romsey and Ringwood. The process is the same wherever the kitchen is.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Nearby places we cover
Neighbouring towns where we offer cooker hood installation:
- Cooker hood installation in Romsey
- Cooker hood installation in Ringwood
- Cooker hood installation in Andover
- Cooker hood installation in Totton
- Cooker hood installation in Shaftesbury
- Cooker hood installation in Warminster
- Cooker hood installation across Wiltshire