Cooker hood installation in Market Harborough

Why do people in Market Harborough choose cooker hood installation?

Cooks across Leicestershire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

If your Market Harborough house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Market Harborough sits about 14 miles south-east of Leicester, and our Leicestershire coverage takes in everything in between.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Power supply connected by an electrician and tested to BS 7671
Recirculating hoods fitted with carbon filters, and their limits explained
Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed

Cooker hood installation prices in Market Harborough

These guide ranges include VAT at 20% and are adjusted for prices in the East Midlands. We confirm your price in writing after a free survey visit. For the East Midlands, these ranges are close to the national figures.

Cooker hood installation prices in Market Harborough
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£290–£870
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£290–£610
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£290

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Market Harborough

You will find Victorian terraces, 1930s semis, post-war estate houses and new-build estates throughout Leicestershire. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help. Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early.

What rules apply to cooker hood installation in Market Harborough?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Before you book cooker hood installation in Market Harborough

If your Market Harborough home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
For an island hood in your Market Harborough kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Market Harborough

How much does cooker hood installation cost in Market Harborough?

For a like-for-like cooker hood swap, budget around £120 to £230 including VAT in Market Harborough. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Do you work near Market Harborough as well?

Yes. As well as Market Harborough itself, we cover the rest of Leicestershire and nearby towns such as Corby and Kettering. The process is the same wherever the kitchen is.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Cooker hood installation near Market Harborough

We also carry out cooker hood installation in these towns near Market Harborough: