Cooker hood installation in Coulsdon

Thinking about cooker hood installation in Coulsdon?

Homeowners in Coulsdon adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

Cooks across Greater London who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. Kitchens in every part of Coulsdon are covered, and the survey visit is free wherever you are in Greater London.

What is in a typical job?

Here is what usually goes into cooker hood installation, adjusted to your Coulsdon kitchen after we have measured it:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Short, straight runs of rigid ducting wherever the route allows
Core drilling through the outside wall and an external grille fitted and sealed
Recirculating hoods fitted with carbon filters, and their limits explained
Hood fixed at the height set by the hood and hob manufacturers
Island and ceiling hoods fixed into the ceiling structure by two people

What does cooker hood installation cost in Coulsdon?

Typical cooker hood installation prices for homes in Coulsdon, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does cooker hood installation cost in Coulsdon?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Coulsdon homes

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to cooker hood installation in Coulsdon?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

If your Coulsdon home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Before choosing a hood for your Coulsdon kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Coulsdon

How much does cooker hood installation cost in Coulsdon?

Cooker hood installation in Coulsdon typically costs £160 to £310 including VAT for a like-for-like cooker hood swap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Coulsdon?

Yes. We work across Coulsdon, including the CR5 postcode district, and nearby towns such as Purley and Banstead. Book a free survey visit and we will arrange a time that suits you.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Nearby places we cover

Close to Coulsdon? We cover these nearby towns too: