Cooker hood installation · Hampshire
Cooker hood installation in Basingstoke
Cooker hood installation in Basingstoke starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
Thinking about cooker hood installation in Basingstoke?
People in flats across Hampshire sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.
If condensation runs down the windows of your Basingstoke kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. If your home is in Basingstoke or close by in Alton or Fleet, the same survey, quote and fitting process applies.
What is included in the work?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Power supply connected by an electrician and tested to BS 7671
- Island and ceiling hoods fixed into the ceiling structure by two people
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Recirculating hoods fitted with carbon filters, and their limits explained
- Core drilling through the outside wall and an external grille fitted and sealed
How much does cooker hood installation cost in Basingstoke?
The figures below are guide prices for Basingstoke, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
House types around Basingstoke and what they mean for a kitchen
The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Do you need approval for cooker hood installation in Basingstoke?
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Practical advice for Basingstoke homeowners
- Before choosing a hood for your Basingstoke kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
- Check whether your Basingstoke home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
Questions about cooker hood installation in Basingstoke
How much does cooker hood installation cost in Basingstoke?
Cooker hood installation in Basingstoke typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of Basingstoke do you work in?
All of them. Our Hampshire coverage takes in the whole of Basingstoke, including the RG21 postcode district, as well as surrounding towns such as Alton. If you are unsure, send us your postcode.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Nearby places we cover
We also carry out cooker hood installation in these towns near Basingstoke:
- Cooker hood installation in Alton
- Cooker hood installation in Fleet
- Cooker hood installation in Thatcham
- Cooker hood installation in Yateley
- Cooker hood installation in Farnham
- Cooker hood installation in Aldershot
- Cooker hood installation across Hampshire