Kitchen Installers UK

Utility room fitting · Greater London

Utility room fitting in West Ealing

If you live in West Ealing and need utility room fitting, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£520 to £9,100
Postcodes includeW13
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

What prompts utility room fitting in West Ealing?

If your West Ealing home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.

Larger households in West Ealing sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. Homes right across West Ealing are covered, as are nearby places such as Greenford, Acton and the villages in between.

What does utility room fitting in West Ealing include?

Your written quote lists everything included. For utility room fitting, that normally means:

  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Extract fan fitted to clear moisture from washing and drying
  • Worktop over the washing machine and dryer, supported clear of the appliances

What does utility room fitting cost in West Ealing?

Typical utility room fitting prices for homes in West Ealing, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does utility room fitting cost in West Ealing?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in West Ealing

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book utility room fitting in West Ealing

  • If the utility will be in the garage of your West Ealing home, make sure the space stays above freezing in winter for the pipes and machines.
  • Before choosing a dryer for your West Ealing utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
  • If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in West Ealing

How much does utility room fitting cost in West Ealing?

Guide prices in West Ealing are about £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of West Ealing do you work in?

All of them. Our Greater London coverage takes in the whole of West Ealing, including the W13 postcode district, as well as surrounding towns such as Greenford. If you are unsure, send us your postcode.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting near West Ealing

Close to West Ealing? We cover these nearby towns too:

Other kitchen work in West Ealing

Free survey visit

Book a free survey visit in West Ealing

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price