Utility room fitting in Nuneaton

What prompts utility room fitting in Nuneaton?

If the kitchen in your Warwickshire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Dog owners and keen walkers around Nuneaton often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets. If your home is in Nuneaton or close by in Bedworth or Hinckley, the same survey, quote and fitting process applies.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Extract fan fitted to clear moisture from washing and drying
Free survey visit to check water, waste, power and outside wall positions
Base, wall and tall units fitted, levelled and fixed to the wall
A vent to outside for a vented dryer, or a drain hose for condenser models
Stacking kit fitted where the washer and dryer sit one above the other
Utility sink and tap plumbed in, with new supplies and waste where none exist

Utility room fitting prices in Nuneaton

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.

Utility room fitting prices in Nuneaton
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£3,000
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,000–£7,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£400–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Nuneaton?

Typical homes in this part of Warwickshire include Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.

Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance. Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help.

Building regulations, electrics and gas in Nuneaton

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.

Before you book utility room fitting in Nuneaton

Plan the sockets in your Nuneaton utility so each appliance can be switched off at an accessible switch without moving the machine.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Nuneaton

How much does utility room fitting cost in Nuneaton?

Guide prices in Nuneaton are about £1,200 to £3,000 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Nuneaton before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Nuneaton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Nearby places we cover

Close to Nuneaton? We cover these nearby towns too: