Utility room fitting in Northwich

Thinking about utility room fitting in Northwich?

When a new kitchen is being planned in Cheshire, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.

Landlords letting larger family homes across Cheshire sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. Our Cheshire coverage reaches every part of Northwich (CW9) and out towards Winsford.

What is included in the work?

After the survey visit we write the scope down. For utility room fitting in Northwich it usually covers:

A vent to outside for a vented dryer, or a drain hose for condenser models
Free survey visit to check water, waste, power and outside wall positions
Washing machine supply, waste and isolation valve, tested for leaks
Extract fan fitted to clear moisture from washing and drying
Stacking kit fitted where the washer and dryer sit one above the other
Worktop over the washing machine and dryer, supported clear of the appliances

Guide prices for utility room fitting in Northwich

The figures below are guide prices for Northwich, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for utility room fitting in Northwich
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£380–£950

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Northwich?

Typical homes in this part of Cheshire include Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door. Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap.

Regulations for kitchen work in Northwich

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Practical advice for Northwich homeowners

Before choosing a dryer for your Northwich utility, check whether there is an outside wall close enough for a short, straight vent duct.
If your Cheshire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Northwich

How much does utility room fitting cost in Northwich?

Guide prices in Northwich are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Northwich?

Yes. We work across Northwich, including the CW9 postcode district, and nearby towns such as Winsford and Knutsford. Book a free survey visit and we will arrange a time that suits you.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting near Northwich

Neighbouring towns where we offer utility room fitting: