Utility room fitting · Kent
Utility room fitting in Margate
From the survey to handover, utility room fitting in Margate is run by us as one job, with the fitters and trades booked in the right order.
Why do people in Margate choose utility room fitting?
If your Margate home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.
If the kitchen in your Kent home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage. Kitchens in every part of Margate are covered, and the survey visit is free wherever you are in Kent.
What does the job involve?
The exact scope is agreed after the survey, but a typical job in Margate covers:
- Stacking kit fitted where the washer and dryer sit one above the other
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Washing machine supply, waste and isolation valve, tested for leaks
- Extract fan fitted to clear moisture from washing and drying
- Worktop over the washing machine and dryer, supported clear of the appliances
- Free survey visit to check water, waste, power and outside wall positions
How much does utility room fitting cost in Margate?
As a starting point for Margate, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,400–£3,400 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,400–£8,000 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £460–£1,200 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes around Margate
The housing mix across Kent includes Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, so no two kitchen fits are quite alike. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.
Building regulations, electrics and gas in Margate
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Getting the most from your utility room fitting
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
- Plan the sockets in your Margate utility so each appliance can be switched off at an accessible switch without moving the machine.
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
- Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.
Questions about utility room fitting in Margate
How much does utility room fitting cost in Margate?
Utility room fitting in Margate typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover all of Margate?
Yes. We work across Margate, including the CT9 postcode district, and nearby towns such as Broadstairs and Ramsgate. Book a free survey visit and we will arrange a time that suits you.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Also covering nearby towns
Neighbouring towns where we offer utility room fitting:
- Utility room fitting in Broadstairs
- Utility room fitting in Ramsgate
- Utility room fitting in Deal
- Utility room fitting in Herne Bay
- Utility room fitting in Canterbury
- Utility room fitting in Whitstable
- Utility room fitting across Kent