Utility room fitting in Maidstone

Why do people in Maidstone choose utility room fitting?

In a Maidstone house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall.

Dog owners and keen walkers around Maidstone often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets. We cover all of Maidstone, including the ME14 postcode district, and travel out to neighbouring towns across Kent.

What is included in the work?

Here is what usually goes into utility room fitting, adjusted to your Maidstone kitchen after we have measured it:

Free survey visit to check water, waste, power and outside wall positions
Stacking kit fitted where the washer and dryer sit one above the other
Utility sink and tap plumbed in, with new supplies and waste where none exist
Worktop over the washing machine and dryer, supported clear of the appliances
Extract fan fitted to clear moisture from washing and drying
Base, wall and tall units fitted, levelled and fixed to the wall

Utility room fitting prices in Maidstone

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Utility room fitting prices in Maidstone
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Maidstone?

Typical homes in this part of Kent include Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

What rules apply to utility room fitting in Maidstone?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Practical advice for Maidstone homeowners

Plan the sockets in your Maidstone utility so each appliance can be switched off at an accessible switch without moving the machine.
If your Kent home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Maidstone

How much does utility room fitting cost in Maidstone?

Utility room fitting in Maidstone typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Maidstone before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Maidstone. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting near Maidstone

We also carry out utility room fitting in these towns near Maidstone: