Utility room fitting · Tyne and Wear
Utility room fitting in Hebburn
Utility room fitting in Hebburn starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
Thinking about utility room fitting in Hebburn?
If your Hebburn home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.
If the kitchen in your Tyne and Wear home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage. Hebburn sits about 4 miles east of Newcastle upon Tyne, and our Tyne and Wear coverage takes in everything in between.
What we cover for utility room fitting in Hebburn
Here is what usually goes into utility room fitting, adjusted to your Hebburn kitchen after we have measured it:
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- Stacking kit fitted where the washer and dryer sit one above the other
How much does utility room fitting cost in Hebburn?
The figures below are guide prices for Hebburn, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Costs across the North East tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,100–£2,700 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £2,700–£6,300 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £360–£900 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes around Hebburn
In and around Hebburn, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.
Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.
What rules apply to utility room fitting in Hebburn?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.
Practical advice for Hebburn homeowners
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
- In a Hebburn flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Hebburn
How much does utility room fitting cost in Hebburn?
Utility room fitting in Hebburn typically costs £1,100 to £2,700 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Hebburn as well?
Yes. As well as Hebburn itself, we cover the rest of Tyne and Wear and nearby towns such as Jarrow and Wallsend. The process is the same wherever the kitchen is.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Nearby places we cover
The same service is available a short drive from Hebburn, including:
- Utility room fitting in Jarrow
- Utility room fitting in Wallsend
- Utility room fitting in Felling
- Utility room fitting in Gateshead
- Utility room fitting in South Shields
- Utility room fitting in Newcastle upon Tyne
- Utility room fitting across Tyne and Wear