Utility room fitting in Coalville

When does utility room fitting make sense in Coalville?

If your Coalville home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.

In a Coalville house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. Kitchens in every part of Coalville are covered, and the survey visit is free wherever you are in Leicestershire.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Washing machine supply, waste and isolation valve, tested for leaks
Worktop over the washing machine and dryer, supported clear of the appliances
Base, wall and tall units fitted, levelled and fixed to the wall
Extract fan fitted to clear moisture from washing and drying
Utility sink and tap plumbed in, with new supplies and waste where none exist
Stacking kit fitted where the washer and dryer sit one above the other

What should you budget for utility room fitting in Coalville?

Typical utility room fitting prices for homes in Coalville, including VAT and adjusted for the East Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. For the East Midlands, these ranges are close to the national figures.

What should you budget for utility room fitting in Coalville?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£2,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,900–£6,800
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£390–£970

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Coalville homes

Across Leicestershire you will often find Victorian terraces, 1930s semis, post-war estate houses and new-build estates, and each shapes the kitchen differently. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help. Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early.

What rules apply to utility room fitting in Coalville?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Worth knowing before the fit

Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
If the utility will be in the garage of your Coalville home, make sure the space stays above freezing in winter for the pipes and machines.
If your Leicestershire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Coalville

How much does utility room fitting cost in Coalville?

Guide prices in Coalville are about £1,200 to £2,900 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Coalville do you work in?

All of them. Our Leicestershire coverage takes in the whole of Coalville, including the LE67 postcode district, as well as surrounding towns such as Ashby-de-la-Zouch. If you are unsure, send us your postcode.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting in neighbouring towns

Neighbouring towns where we offer utility room fitting: