Replacement kitchen doors in Telford

What prompts replacement kitchen doors in Telford?

Landlords across Shropshire often refresh a rental kitchen between tenancies with new doors and drawer fronts, keeping the sound carcasses and the appliances in place.

Peeling wrapped doors near the oven or kettle are a common reason people in Telford ask about replacements, especially when the units underneath are still fine. Kitchens in every part of Telford are covered, and the survey visit is free wherever you are in Shropshire.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Doors and drawer fronts made to measure or matched to the existing sizes
Hinge holes drilled to line up with the positions on your carcasses
Free survey visit to check the carcasses and measure every door and drawer front
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Handles or knobs drilled from a template so they sit at a consistent height
New soft-close hinges fitted and every door adjusted so the gaps run even

What do replacement kitchen doors cost in Telford?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.

What do replacement kitchen doors cost in Telford?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,000–£3,000
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,000–£5,000
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£300–£800
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£150–£600

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Kitchens in homes around Telford

Typical homes in this part of Shropshire include timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.

Regulations for kitchen work in Telford

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Tips before you start

Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Telford

How much do replacement kitchen doors cost in Telford?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,000 to £3,000 including VAT in Telford. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Can you measure up in Telford before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Telford. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Replacement kitchen doors near Telford

Close to Telford? We cover these nearby towns too: