Replacement kitchen doors in Rochester

Is replacement kitchen doors right for your Rochester kitchen?

If you have bought a Rochester home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two.

Peeling wrapped doors near the oven or kettle are a common reason people in Rochester ask about replacements, especially when the units underneath are still fine. Kitchens in every part of Rochester are covered, and the survey visit is free wherever you are in Kent.

What do replacement kitchen doors in Rochester include?

After the survey visit we write the scope down. For replacement kitchen doors in Rochester it usually covers:

Free survey visit to check the carcasses and measure every door and drawer front
Hinge holes drilled to line up with the positions on your carcasses
Handles or knobs drilled from a template so they sit at a consistent height
Doors and drawer fronts made to measure or matched to the existing sizes
New fronts fixed to integrated appliances with their door-fixing kits
Drawer fronts fixed to existing drawer boxes, or new boxes where worn

Replacement kitchen doors prices in Rochester

Typical replacement kitchen doors prices for homes in Rochester, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Replacement kitchen doors prices in Rochester
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,200–£3,400
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,300–£5,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£340–£920
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£170–£690

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Rochester?

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Do you need approval for replacement kitchen doors in Rochester?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your replacement kitchen doors

Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Ask whether the cornice and pelmet will be replaced too, as old ones left on a Rochester kitchen with new doors often show a colour mismatch.
Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Rochester

How much do replacement kitchen doors cost in Rochester?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,200 to £3,400 including VAT in Rochester. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Rochester do you work in?

All of them. Our Kent coverage takes in the whole of Rochester, including the ME1 postcode district, as well as surrounding towns such as Chatham. If you are unsure, send us your postcode.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Replacement kitchen doors near Rochester

The same service is available a short drive from Rochester, including: