Replacement kitchen doors in Long Eaton

What prompts replacement kitchen doors in Long Eaton?

If you have bought a Long Eaton home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two.

When one door in a Long Eaton kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer. We work throughout Long Eaton (NG10) and across the wider Derbyshire area.

What we cover for replacement kitchen doors in Long Eaton

Here is what usually goes into replacement kitchen doors, adjusted to your Long Eaton kitchen after we have measured it:

Matching end panels, plinths, cornice and pelmet cut and fitted
Handles or knobs drilled from a template so they sit at a consistent height
New soft-close hinges fitted and every door adjusted so the gaps run even
Hinge holes drilled to line up with the positions on your carcasses
Doors and drawer fronts made to measure or matched to the existing sizes
Drawer fronts fixed to existing drawer boxes, or new boxes where worn

What do replacement kitchen doors cost in Long Eaton?

Typical replacement kitchen doors prices for homes in Long Eaton, including VAT and adjusted for the East Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the East Midlands are broadly in line with UK averages.

What do replacement kitchen doors cost in Long Eaton?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£970–£2,900
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,900–£4,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£290–£780
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£150–£580

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

House types around Long Eaton and what they mean for a kitchen

In and around Long Eaton, homes range across gritstone and limestone cottages, Victorian terraces, 1930s semis and former mining village terraces. Terraces in Derby and Chesterfield often have a long galley behind the back room, while stone cottages in the Peak District may have a small kitchen in a rear extension.

Water hardness varies across Derbyshire, so check with your supplier; where it is harder, limescale on taps and boiling water taps is worth planning for. Steep hill villages and narrow lanes can limit delivery vehicles, while terraced streets in the towns may have little parking near the front door.

Building regulations, electrics and gas in Long Eaton

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Homes in the Peak District National Park, listed buildings and conservation areas may need consent for a new vent on a visible wall or alterations to historic features.

Getting the most from your replacement kitchen doors

Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
Ask whether the cornice and pelmet will be replaced too, as old ones left on a Long Eaton kitchen with new doors often show a colour mismatch.
Choose handles after the doors, holding samples against the new colour in your Long Eaton kitchen's daylight before anything is drilled.
Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.

Questions about replacement kitchen doors in Long Eaton

How much do replacement kitchen doors cost in Long Eaton?

Guide prices in Long Eaton are about £970 to £2,900 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Long Eaton do you work in?

All of them. Our Derbyshire coverage takes in the whole of Long Eaton, including the NG10 postcode district, as well as surrounding towns such as Ilkeston. If you are unsure, send us your postcode.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Nearby places we cover

The same service is available a short drive from Long Eaton, including: