Replacement kitchen doors in Kilwinning

Why do people in Kilwinning choose replacement kitchen doors?

Landlords across Ayrshire often refresh a rental kitchen between tenancies with new doors and drawer fronts, keeping the sound carcasses and the appliances in place.

If your Ayrshire kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound. We cover all of Kilwinning, including the KA13 postcode district, and travel out to neighbouring towns across Ayrshire.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Kilwinning covers:

Doors and drawer fronts made to measure or matched to the existing sizes
Hinge holes drilled to line up with the positions on your carcasses
Free survey visit to check the carcasses and measure every door and drawer front
New fronts fixed to integrated appliances with their door-fixing kits
New soft-close hinges fitted and every door adjusted so the gaps run even
Handles or knobs drilled from a template so they sit at a consistent height

Guide prices for replacement kitchen doors in Kilwinning

The figures below are guide prices for Kilwinning, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Guide prices for replacement kitchen doors in Kilwinning
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£940–£2,800
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,900–£4,700
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£280–£750
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£560

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Kilwinning homes

In and around Kilwinning, homes range across red sandstone villas, sandstone tenement flats, four-in-a-block flats and post-war council-built houses. Four-in-a-block flats and ex-council houses often have a small galley kitchen, while sandstone villas in Ayr tend to have a larger kitchen with a separate dining room.

Ayrshire's mains water is soft, so limescale is rarely a problem and taps, sinks and boiling water taps tend to stay cleaner. Upper four-in-a-block flats usually have their own stair, and coastal towns can have limited parking, so the route for long worktops is checked at the survey.

Do you need approval for replacement kitchen doors in Kilwinning?

In Scotland, replacing kitchen doors and drawer fronts counts as replacing fitments, which does not need a building warrant. A listed building may need listed building consent if original fitted joinery is being altered or removed. If plinth or cornice lighting is added at the same time, the wiring must meet the building standards and BS 7671, so ask for the right electrical certificate. Nothing else about a door change involves building standards.

Listed sandstone villas and conservation areas in older town centres may need consent for a new external vent, and flat owners may need neighbours' agreement for shared walls.

Planning ahead

Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Choose handles after the doors, holding samples against the new colour in your Kilwinning kitchen's daylight before anything is drilled.
If the hob or sink in your Ayrshire kitchen needs to move, plan a fuller refit rather than new doors on a layout that does not work.
Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.

Questions about replacement kitchen doors in Kilwinning

How much do replacement kitchen doors cost in Kilwinning?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £940 to £2,800 including VAT in Kilwinning. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.

Which parts of Kilwinning do you work in?

All of them. Our Ayrshire coverage takes in the whole of Kilwinning, including the KA13 postcode district, as well as surrounding towns such as Irvine. If you are unsure, send us your postcode.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Replacement kitchen doors in neighbouring towns

Close to Kilwinning? We cover these nearby towns too: