Replacement kitchen doors in Irlam

Who usually needs replacement kitchen doors in Irlam?

Landlords across Greater Manchester often refresh a rental kitchen between tenancies with new doors and drawer fronts, keeping the sound carcasses and the appliances in place.

Some Irlam households getting ready to sell want the kitchen to look fresher in the photographs without the cost and mess of taking it out. Our Greater Manchester coverage reaches every part of Irlam (M44) and out towards Urmston.

What we cover for replacement kitchen doors in Irlam

Here is what usually goes into replacement kitchen doors, adjusted to your Irlam kitchen after we have measured it:

Hinge holes drilled to line up with the positions on your carcasses
Free survey visit to check the carcasses and measure every door and drawer front
Matching end panels, plinths, cornice and pelmet cut and fitted
New fronts fixed to integrated appliances with their door-fixing kits
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Handles or knobs drilled from a template so they sit at a consistent height

Replacement kitchen doors prices in Irlam

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Replacement kitchen doors prices in Irlam
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£950–£2,800
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,900–£4,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£280–£760
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£570

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Irlam homes

Across Greater Manchester you will often find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

Regulations for kitchen work in Irlam

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Getting the most from your replacement kitchen doors

Ask whether the cornice and pelmet will be replaced too, as old ones left on an Irlam kitchen with new doors often show a colour mismatch.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
If the hob or sink in your Greater Manchester kitchen needs to move, plan a fuller refit rather than new doors on a layout that does not work.
Old drawer boxes may not take new fronts neatly; worn runners or unusual fixings sometimes make new drawer boxes worth adding.

Questions about replacement kitchen doors in Irlam

How much do replacement kitchen doors cost in Irlam?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £950 to £2,800 including VAT in Irlam. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Do you cover all of Irlam?

Yes. We work across Irlam, including the M44 postcode district, and nearby towns such as Urmston and Sale. Book a free survey visit and we will arrange a time that suits you.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Nearby places we cover

We also carry out replacement kitchen doors in these towns near Irlam: