Replacement kitchen doors in Haverfordwest

Why replacement kitchen doors for a Haverfordwest home?

Landlords across Dyfed often refresh a rental kitchen between tenancies with new doors and drawer fronts, keeping the sound carcasses and the appliances in place.

If your Dyfed kitchen has worktops you still like but dated doors, new fronts in a different style or colour let you keep the surfaces and change the rest. We cover all of Haverfordwest, including the SA61 postcode district, and travel out to neighbouring towns across Dyfed.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Haverfordwest covers:

Matching end panels, plinths, cornice and pelmet cut and fitted
New fronts fixed to integrated appliances with their door-fixing kits
Handles or knobs drilled from a template so they sit at a consistent height
New soft-close hinges fitted and every door adjusted so the gaps run even
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Free survey visit to check the carcasses and measure every door and drawer front

Guide prices for replacement kitchen doors in Haverfordwest

As a starting point for Haverfordwest, these ranges include VAT at 20% and allow for typical labour costs in Wales. Costs across Wales tend to sit under UK averages, which these ranges reflect.

Guide prices for replacement kitchen doors in Haverfordwest
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£920–£2,800
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,800–£4,600
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£280–£740
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£550

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Haverfordwest?

Across Dyfed you will often find stone cottages, Victorian terraces, farmhouses and post-war bungalows, and each shapes the kitchen differently. Stone cottages and farmhouses often have a small kitchen in a rear extension, while terraces in Llanelli and Aberystwyth tend to have a narrow galley at the back.

Rural farm tracks, steep coastal lanes and long distances between villages can affect delivery vehicles, so worktop lengths and timing need planning ahead. Mains water across most of Dyfed is soft, so limescale is rarely a big problem, though farms on private supplies may need their own filtering.

What rules apply to replacement kitchen doors in Haverfordwest?

In Wales, new kitchen doors need no planning permission or Building Regulations approval; if the building is listed and original fitted joinery is affected, listed building consent may be needed. Adding plinth or cornice lighting is different: extending an existing circuit within a kitchen is notifiable under Part P in Wales, so that part is certified through a competent person scheme or building control. Doors, drawer fronts, panels and handles on their own need no paperwork.

Homes in the Pembrokeshire Coast National Park or Bannau Brycheiniog, listed cottages and conservation areas may need consent for a new external vent or historic alterations.

Planning ahead

Open the sink cupboard in your Haverfordwest kitchen and press the base; soft or swollen board means that unit needs replacing before new doors.
Choose handles after the doors, holding samples against the new colour in your Haverfordwest kitchen's daylight before anything is drilled.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Haverfordwest

How much do replacement kitchen doors cost in Haverfordwest?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £920 to £2,800 including VAT in Haverfordwest. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Which parts of Haverfordwest do you work in?

All of them. Our Dyfed coverage takes in the whole of Haverfordwest, including the SA61 postcode district, as well as surrounding towns such as Milford Haven. If you are unsure, send us your postcode.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Replacement kitchen doors in neighbouring towns

Neighbouring towns where we offer replacement kitchen doors: