Replacement kitchen doors in Dunstable

Why do people in Dunstable choose replacement kitchen doors?

If your Bedfordshire kitchen has worktops you still like but dated doors, new fronts in a different style or colour let you keep the surfaces and change the rest.

Homeowners in Dunstable with solid, well-fitted units but tired doors often choose new fronts rather than living through the upheaval of a full kitchen replacement. Kitchens in every part of Dunstable are covered, and the survey visit is free wherever you are in Bedfordshire.

What is in a typical job?

Your written quote lists everything included. For replacement kitchen doors, that normally means:

Matching end panels, plinths, cornice and pelmet cut and fitted
Doors and drawer fronts made to measure or matched to the existing sizes
Hinge holes drilled to line up with the positions on your carcasses
New fronts fixed to integrated appliances with their door-fixing kits
Free survey visit to check the carcasses and measure every door and drawer front
Handles or knobs drilled from a template so they sit at a consistent height

Replacement kitchen doors prices in Dunstable

The figures below are guide prices for Dunstable, including VAT and adjusted for typical costs across the East of England. The fixed price comes after we have measured up. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.

Replacement kitchen doors prices in Dunstable
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,100–£3,200
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,200–£5,400
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£320–£860
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£160–£650

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Dunstable homes

Typical homes in this part of Bedfordshire include Victorian terraces, 1930s semis, post-war council-built houses and new-build estates. Terraced houses here often have a narrow galley or back-addition kitchen, while interwar semis tend to have a small square kitchen at the rear.

Town-centre terraces can have tight on-street parking, so it helps to plan where a van unloads and how long worktops will pass through a narrow hallway. Water across most of Bedfordshire is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Dunstable

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Fitting a kitchen needs no planning permission, but listed cottages in the older market towns may need listed building consent for changes such as a new vent through a historic wall.

Getting the most from your replacement kitchen doors

Ask whether the cornice and pelmet will be replaced too, as old ones left on a Dunstable kitchen with new doors often show a colour mismatch.
If the hob or sink in your Bedfordshire kitchen needs to move, plan a fuller refit rather than new doors on a layout that does not work.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.

Questions about replacement kitchen doors in Dunstable

How much do replacement kitchen doors cost in Dunstable?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,100 to £3,200 including VAT in Dunstable. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.

Do you cover all of Dunstable?

Yes. We work across Dunstable, including the LU6 postcode district, and nearby towns such as Luton and Leighton Buzzard. Book a free survey visit and we will arrange a time that suits you.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Replacement kitchen doors near Dunstable

Neighbouring towns where we offer replacement kitchen doors: