Replacement kitchen doors in Denton

Is replacement kitchen doors right for your Denton kitchen?

Landlords across Greater Manchester often refresh a rental kitchen between tenancies with new doors and drawer fronts, keeping the sound carcasses and the appliances in place.

If your Greater Manchester kitchen has worktops you still like but dated doors, new fronts in a different style or colour let you keep the surfaces and change the rest. Kitchens in every part of Denton are covered, and the survey visit is free wherever you are in Greater Manchester.

What does the job involve?

Here is what usually goes into replacement kitchen doors, adjusted to your Denton kitchen after we have measured it:

Doors and drawer fronts made to measure or matched to the existing sizes
New fronts fixed to integrated appliances with their door-fixing kits
Hinge holes drilled to line up with the positions on your carcasses
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Handles or knobs drilled from a template so they sit at a consistent height
Free survey visit to check the carcasses and measure every door and drawer front

What do replacement kitchen doors cost in Denton?

The figures below are guide prices for Denton, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

What do replacement kitchen doors cost in Denton?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£950–£2,800
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,900–£4,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£280–£760
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£570

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Denton homes

In and around Denton, homes range across Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

What rules apply to replacement kitchen doors in Denton?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Practical advice for Denton homeowners

If you let out a Denton property, new doors can often be fitted between tenancies in a day or two once they have been delivered.
Choose handles after the doors, holding samples against the new colour in your Denton kitchen's daylight before anything is drilled.
Open the sink cupboard in your Denton kitchen and press the base; soft or swollen board means that unit needs replacing before new doors.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Denton

How much do replacement kitchen doors cost in Denton?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £950 to £2,800 including VAT in Denton. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Which parts of Denton do you work in?

All of them. Our Greater Manchester coverage takes in the whole of Denton, including the M34 postcode district, as well as surrounding towns such as Hyde. If you are unsure, send us your postcode.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Also covering nearby towns

Neighbouring towns where we offer replacement kitchen doors: