Kitchen Installers UK

Replacement kitchen doors · England

Replacement kitchen doors in Cheshire

We carry out replacement kitchen doors across Cheshire, from Warrington to the smaller towns, with a free survey visit and an itemised written quote as standard.

Guide price£140 to £4,800
Towns covered16 towns, including Warrington
Timescale1 to 2 days on site once the doors arrive
A fitter hanging a new navy shaker door on an existing kitchen cabinet, with old cream doors stacked against the wall

What prompts replacement kitchen doors in Cheshire?

When one door in a Cheshire kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.

Peeling wrapped doors near the oven or kettle are a common reason people in Cheshire ask about replacements, especially when the units underneath are still fine.

What do replacement kitchen doors in Cheshire include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Free survey visit to check the carcasses and measure every door and drawer front
  • Doors and drawer fronts made to measure or matched to the existing sizes
  • Hinge holes drilled to line up with the positions on your carcasses
  • New soft-close hinges fitted and every door adjusted so the gaps run even
  • Drawer fronts fixed to existing drawer boxes, or new boxes where worn
  • Handles or knobs drilled from a template so they sit at a consistent height
  • Matching end panels, plinths, cornice and pelmet cut and fitted
  • New fronts fixed to integrated appliances with their door-fixing kits

How much do replacement kitchen doors cost in Cheshire?

Typical replacement kitchen doors prices for homes in Cheshire, including VAT and adjusted for the North West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs across the North West tend to sit under UK averages, which these ranges reflect.

How much do replacement kitchen doors cost in Cheshire?
Typical projectGuide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles£950–£2,800
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses£1,900–£4,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted£280–£760
Matching end panels, plinths and corniceCut and fitted to suit the new doors£140–£570

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Kitchens in homes across Cheshire

You will find Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages throughout Cheshire. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap. Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door.

A common job in a 1930s semi is removing the wall between kitchen and dining room and adding a peninsula or island with seating. Larger detached houses and converted farmhouses here often suit a supply-and-fit kitchen with a separate utility room, integrated appliances and a range cooker.

Rules for replacement kitchen doors in Cheshire

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Before you start

  • If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.
  • A new kitchen makes more sense if the carcasses are damaged, the layout does not work, or the sink and hob need to move.
  • Door sizes and hinge positions vary between makers, so doors must be made to measure or matched carefully to your existing units.
  • Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.
  • If the hob or sink in your Cheshire kitchen needs to move, plan a fuller refit rather than new doors on a layout that does not work.
  • Ask whether the cornice and pelmet will be replaced too, as old ones left on a Cheshire kitchen with new doors often show a colour mismatch.

Questions about replacement kitchen doors in Cheshire

How much do replacement kitchen doors cost in Cheshire?

Replacement kitchen doors in Cheshire typically cost £950 to £2,800 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Cheshire?

Yes. We carry out replacement kitchen doors across Cheshire, including Warrington, Chester, Crewe and Ellesmere Port. Every job starts with a free survey visit and an itemised written quote.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Replacement kitchen doors in towns across Cheshire

Choose a town for local guide prices and postcode coverage:

Replacement kitchen doors in nearby areas

Free survey visit

Book a free survey visit in Cheshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price