Replacement kitchen doors · England
Replacement kitchen doors in Bristol
If you need replacement kitchen doors anywhere in Bristol, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why replacement kitchen doors for a Bristol home?
When one door in a Bristol kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.
Some Bristol households getting ready to sell want the kitchen to look fresher in the photographs without the cost and mess of taking it out.
What do replacement kitchen doors in Bristol include?
After the survey visit we write the scope down. For replacement kitchen doors in Bristol it usually covers:
- Free survey visit to check the carcasses and measure every door and drawer front
- Doors and drawer fronts made to measure or matched to the existing sizes
- Hinge holes drilled to line up with the positions on your carcasses
- New soft-close hinges fitted and every door adjusted so the gaps run even
- Drawer fronts fixed to existing drawer boxes, or new boxes where worn
- Handles or knobs drilled from a template so they sit at a consistent height
- Matching end panels, plinths, cornice and pelmet cut and fitted
- New fronts fixed to integrated appliances with their door-fixing kits
How much do replacement kitchen doors cost in Bristol?
Typical replacement kitchen doors prices for homes in Bristol, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles | £1,000–£3,100 |
| Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses | £2,100–£5,200 |
| Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted | £310–£820 |
| Matching end panels, plinths and corniceCut and fitted to suit the new doors | £150–£620 |
Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.
Kitchens in homes across Bristol
The housing mix across Bristol includes Victorian terraces, Georgian townhouses and flats, 1930s semis and flats in converted houses, so no two kitchen fits are quite alike. Bristol's Victorian terraces often have a narrow rear galley, while Georgian houses split into flats can have kitchens tucked into former bedrooms or reception rooms.
Bristol's mains water is hard, so limescale on taps, kettles and boiling water taps is common, and an inline filter or softener can help. Steep hillside streets, permit parking and terraces with no rear access are common in the city, so long worktops may need careful handling through the front door.
Many Bristol terraces have a small kitchen behind the back room, and opening the two into one space is a popular change. Where a flat sits in a converted Georgian or Victorian house, the work often means fitting a lot into a modest room while working around shared walls and services.
Rules for replacement kitchen doors in Bristol
Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.
Many of the city's older streets are conservation areas and some houses are listed, so a new extractor vent or the removal of historic features may need consent first.
Before you start
- Door sizes and hinge positions vary between makers, so doors must be made to measure or matched carefully to your existing units.
- Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.
- Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.
- If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.
- Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
- Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
Questions about replacement kitchen doors in Bristol
How much do replacement kitchen doors cost in Bristol?
Guide prices in Bristol are about £1,000 to £3,100 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Bristol?
Yes. We carry out replacement kitchen doors across Bristol. Every job starts with a free survey visit and an itemised written quote.
When does a new kitchen make more sense than new doors?
When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.
Can new doors be fitted to my existing kitchen units?
Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.
Can I change to a completely different door style?
Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.