Replacement kitchen doors in Bedworth

What prompts replacement kitchen doors in Bedworth?

Homeowners in Bedworth with solid, well-fitted units but tired doors often choose new fronts rather than living through the upheaval of a full kitchen replacement.

If your Warwickshire kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound. Kitchens in every part of Bedworth are covered, and the survey visit is free wherever you are in Warwickshire.

What does the job involve?

Here is what usually goes into replacement kitchen doors, adjusted to your Bedworth kitchen after we have measured it:

Handles or knobs drilled from a template so they sit at a consistent height
Doors and drawer fronts made to measure or matched to the existing sizes
New soft-close hinges fitted and every door adjusted so the gaps run even
Free survey visit to check the carcasses and measure every door and drawer front
Matching end panels, plinths, cornice and pelmet cut and fitted
Hinge holes drilled to line up with the positions on your carcasses

What should you budget for replacement kitchen doors in Bedworth?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.

What should you budget for replacement kitchen doors in Bedworth?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,000–£3,000
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,000–£5,000
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£300–£800
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£150–£600

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Bedworth?

Typical homes in this part of Warwickshire include Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.

Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance. Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help.

Do you need approval for replacement kitchen doors in Bedworth?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.

Getting the most from your replacement kitchen doors

Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
Ask whether the cornice and pelmet will be replaced too, as old ones left on a Bedworth kitchen with new doors often show a colour mismatch.
Old drawer boxes may not take new fronts neatly; worn runners or unusual fixings sometimes make new drawer boxes worth adding.

Questions about replacement kitchen doors in Bedworth

How much do replacement kitchen doors cost in Bedworth?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,000 to £3,000 including VAT in Bedworth. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Do you work near Bedworth as well?

Yes. As well as Bedworth itself, we cover the rest of Warwickshire and nearby towns such as Nuneaton and Coventry. The process is the same wherever the kitchen is.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Nearby places we cover

Close to Bedworth? We cover these nearby towns too: