Kitchen Installers UK

Open-plan kitchen knock-throughs · Greater London

Open-plan kitchen knock-throughs in Brent

Looking for open-plan kitchen knock-throughs in Brent? We survey, quote and carry out open-plan kitchen knock-throughs for homes across Brent and the rest of Greater London, with one contract from the first measure to the final check.

Guide price£1,000 to £71,500
Postcodes includeHA9
Timescale1 to 3 weeks
A new steel beam over a wide opening between a kitchen and dining room, with temporary props still in place

Thinking about open-plan kitchen knock-throughs in Brent?

If your Brent home is an older terrace, the wall between the kitchen and the middle room may well be load-bearing, so an engineer and a steel beam are likely to be part of the plan.

If you are already replacing the kitchen in your Brent home, knocking through first means the layout is planned for the bigger room rather than squeezed into the old one. Brent sits about 8 miles north-west of Westminster, and our Greater London coverage takes in everything in between.

What does the job involve?

Here is what usually goes into open-plan kitchen knock-throughs, adjusted to your Brent kitchen after we have measured it:

  • Temporary props set, the wall removed and the steel beam bedded on padstones
  • In England and Wales, party wall requirements checked where a beam bears into a shared wall
  • New kitchen fitted once the opening is made good and the structural work inspected
  • Beam boxed in, the opening plastered and the floor joined where the wall stood
  • Free survey visit to check the wall, the floors above and the services running through it
  • Structural engineer arranged to design the beam, padstones and temporary propping

What do open-plan kitchen knock-throughs cost in Brent?

As a starting point for Brent, these ranges include VAT at 20% and allow for typical labour costs in London. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What do open-plan kitchen knock-throughs cost in Brent?
Typical projectGuide price
Non-load-bearing wall removed and made goodStud or light partition, minimal services£1,000–£2,600
Load-bearing wall with a steel beamStructural engineer's design and making good; building control or warrant fees listed separately£3,900–£11,000
Knock-through with a new kitchen-dinerSteel beam, new kitchen, new floor throughout£32,500–£71,500

Load-bearing guide ranges include the structural engineer's design for a typical single opening and making good; council building control or building warrant fees, rerouted services, decorating and the kitchen itself are listed separately. Prices include VAT at 20%.

House types around Brent and what they mean for a kitchen

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to open-plan kitchen knock-throughs in Brent?

In England, removing a load-bearing wall needs a structural engineer's design and Building Regulations approval through local authority building control or a registered building control approver. Where a beam bears into a party wall, the Party Wall etc. Act 1996 means serving notice on the neighbours before work starts. If the new open-plan kitchen opens onto the hall and stairs, building control will check the escape route, and homes with a floor more than 4.5 metres above ground may need extra fire safety measures.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

  • Clear both rooms completely before the opening is made in your Greater London home, and seal doors to the rest of the house with dust sheets and tape.
  • Choose the new floor finish before the wall comes out, so the strip where the wall stood can be levelled and covered in one go.
  • Tell your neighbours early if a beam may bear into a wall you share; in England and Wales a party wall notice may be needed before work starts.
  • Check what runs through the wall: sockets, switches, radiator pipes, gas pipes and sometimes a soil stack all need rerouting first.

Questions about open-plan kitchen knock-throughs in Brent

How much do open-plan kitchen knock-throughs cost in Brent?

For removing a non-load-bearing wall and making good, budget around £1,000 to £2,600 including VAT in Brent. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Brent as well?

Yes. As well as Brent itself, we cover the rest of Greater London and nearby towns such as Wembley and Sudbury, Greater London. The process is the same wherever the kitchen is.

When is the new kitchen fitted after a knock-through?

After the opening is complete. The order is propping, removing the wall, setting the beam on its padstones, inspection, then boxing in, plastering and joining the floor where the wall stood. Fresh plaster usually needs three to six weeks to dry before full decorating, though a mist coat can go on sooner, so the units are often fitted while the walls dry and the decorating follows later.

Do I need approval to remove a wall between kitchen and dining room?

For a load-bearing wall, yes, everywhere in the UK. In England, Wales and Northern Ireland that means Building Regulations approval through building control; in Scotland a building warrant must be granted before work starts, followed by a completion certificate. A non-load-bearing partition is simpler, although a listed building may need listed building consent and a leasehold flat usually needs the freeholder's written consent.

Who designs the steel beam for a knock-through?

A structural engineer does. We arrange the engineer, who calculates the loads and specifies the beam size, the padstones it bears on and the temporary propping needed while the wall comes out. Those calculations go with the Building Regulations application or building warrant. We do not design steelwork ourselves; the work follows the engineer's design and is inspected as part of the approval.

Nearby places we cover

The same service is available a short drive from Brent, including:

More services for Brent kitchens

Free survey visit

Book a free survey visit in Brent

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price