Kitchen worktop fitting · Scotland
Kitchen worktop fitting in the Scottish Borders
Homeowners and landlords across the Scottish Borders can book us for kitchen worktop fitting: laminate, solid wood, quartz and granite worktops fitted or templated, with joints, cut-outs and upstands.
Who usually needs kitchen worktop fitting in the Scottish Borders?
If your Scottish Borders kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.
When a Scottish Borders kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.
What does kitchen worktop fitting in the Scottish Borders include?
Here is what usually goes into kitchen worktop fitting, adjusted to your Scottish Borders kitchen after we have measured it:
- Free survey visit to measure the runs and check the base units are level
- Old worktops removed and taken away, with the sink and hob disconnected safely
- Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
- Solid wood oiled before and after fitting and fixed to allow seasonal movement
- Quartz, granite or sintered stone templated once the base units are fixed and level
- Undermount sink and hob cut-outs cut and finished by the stone fabricator
- Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
- Matching upstands fitted and the joint to the wall sealed
How much does kitchen worktop fitting cost in the Scottish Borders?
As a starting point for the Scottish Borders, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands | £470–£1,100 |
| Solid wood worktops, supplied and fittedOiled before and after fitting | £850–£1,700 |
| Granite, templated and fittedTemplate visit, cutting, delivery and fitting | £1,400–£3,000 |
| Quartz, templated and fittedTemplate visit, cutting, delivery and fitting | £1,700–£3,300 |
| Old worktops removed and taken awayMore for stone | £80–£240 |
Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.
Kitchens in homes across the Scottish Borders
Across the Scottish Borders you will often find stone mill-town terraces, Victorian villas, farm cottages and post-war council-built houses, and each shapes the kitchen differently. Stone terraces in Hawick and Galashiels often have a small kitchen at the back, while Victorian villas in Peebles and Kelso tend to have larger separate kitchens.
The Scottish Borders generally have soft mains water, though rural homes on private supplies may need testing and filtering. Rural roads and farm tracks can be narrow for delivery lorries, and older town centres may have limited parking, so delivery is planned in advance.
Stone terraces in the mill towns usually have small rooms and thick walls that suit a galley or L-shaped layout. Farm cottages are often off the gas grid, so cooking may be planned around induction, LPG or an oil-fired range.
Rules for kitchen worktop fitting in the Scottish Borders
In Scotland, replacing worktops counts as replacing fitments, so it does not need a building warrant. Any electrical changes, such as new sockets above the worktop, must meet the building standards and BS 7671, and you should ask for an electrical certificate. Gas hobs must be disconnected and reconnected by a Gas Safe registered engineer, and a sink needing a new underground drain connection would need a warrant first.
Older Borders towns often have conservation areas and listed buildings, so a new external vent or changes to historic features may need consent.
Before you start
- Plan the joints: keep laminate joints away from the sink where possible, while stone joints are positioned by the fabricator to suit the slabs.
- Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.
- Have the sink, tap and hob on site for templating, so the fabricator can cut the stone to the exact items you have bought.
- Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.
- If your Scottish Borders home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
- Check that full-length worktops can get into your Scottish Borders home; long lengths need a clear, straight route through the front door and hall.
Questions about kitchen worktop fitting in the Scottish Borders
How much does kitchen worktop fitting cost in the Scottish Borders?
Kitchen worktop fitting in the Scottish Borders typically costs £470 to £1,100 including VAT for laminate worktops, supplied and fitted, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of the Scottish Borders?
Yes. We carry out kitchen worktop fitting across the Scottish Borders, including Hawick, Galashiels, Peebles and Kelso. Every job starts with a free survey visit and an itemised written quote.
Will you fit stone worktops I have ordered myself?
Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.
How long does it take to fit new worktops?
Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.
How are laminate worktops joined at corners?
With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.
Kitchen worktop fitting in towns across the Scottish Borders
Choose a town for local guide prices and postcode coverage:
- Kitchen worktop fitting in Hawick
- Kitchen worktop fitting in Galashiels
- Kitchen worktop fitting in Peebles
- Kitchen worktop fitting in Kelso