Kitchen worktop fitting in Hamilton

Thinking about kitchen worktop fitting in Hamilton?

Many people in Lanarkshire choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template.

If your Lanarkshire kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. Kitchens in every part of Hamilton are covered, and the survey visit is free wherever you are in Lanarkshire.

What is in a typical job?

After the survey visit we write the scope down. For kitchen worktop fitting in Hamilton it usually covers:

Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed
Quartz, granite or sintered stone templated once the base units are fixed and level
Free survey visit to measure the runs and check the base units are level
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers

Guide prices for kitchen worktop fitting in Hamilton

Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Hamilton kitchen. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Guide prices for kitchen worktop fitting in Hamilton
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£470–£1,100
Solid wood worktops, supplied and fittedOiled before and after fitting	£850–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,400–£3,000
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,300
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

House types around Hamilton and what they mean for a kitchen

Typical homes in this part of Lanarkshire include sandstone tenement flats, four-in-a-block flats, new town houses and interwar council-built semis. New-town houses in East Kilbride and Cumbernauld often have a compact galley, while tenement and four-in-a-block flats tend to have a small kitchen off the hall or at the back.

Common stairs in tenements and upper four-in-a-block flats mean units are carried by hand, while new-town estates may have parking courts some distance from the door. Lanarkshire's mains water is soft, so limescale is rarely an issue and taps, sinks and boiling water taps tend to stay cleaner.

Do you need approval for kitchen worktop fitting in Hamilton?

In Scotland, replacing worktops counts as replacing fitments, so it does not need a building warrant. Any electrical changes, such as new sockets above the worktop, must meet the building standards and BS 7671, and you should ask for an electrical certificate. Gas hobs must be disconnected and reconnected by a Gas Safe registered engineer, and a sink needing a new underground drain connection would need a warrant first.

The New Lanark World Heritage Site, other listed buildings and conservation areas may need consent for new vents, and flat owners may need neighbours' agreement.

Worth knowing before the fit

Before templating day at your Hamilton home, make sure the sink, tap and hob are on site so the stone can be cut to them.
If your Hamilton kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Check that full-length worktops can get into your Hamilton home; long lengths need a clear, straight route through the front door and hall.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Hamilton

How much does kitchen worktop fitting cost in Hamilton?

Guide prices in Hamilton are about £470 to £1,100 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Hamilton do you work in?

All of them. Our Lanarkshire coverage takes in the whole of Hamilton, including the ML3 postcode district, as well as surrounding towns such as Motherwell. If you are unsure, send us your postcode.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Nearby places we cover

Neighbouring towns where we offer kitchen worktop fitting: