Kitchen worktop fitting · England
Kitchen worktop fitting in Devon
Homeowners and landlords across Devon can book us for kitchen worktop fitting: laminate, solid wood, quartz and granite worktops fitted or templated, with joints, cut-outs and upstands.
Who usually needs kitchen worktop fitting in Devon?
Solid wood that has blackened around the sink and tap is a common reason people in Devon ask about replacing their worktops with something new.
Homeowners in Devon with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is.
What does kitchen worktop fitting in Devon include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to measure the runs and check the base units are level
- Old worktops removed and taken away, with the sink and hob disconnected safely
- Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
- Solid wood oiled before and after fitting and fixed to allow seasonal movement
- Quartz, granite or sintered stone templated once the base units are fixed and level
- Undermount sink and hob cut-outs cut and finished by the stone fabricator
- Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
- Matching upstands fitted and the joint to the wall sealed
How much does kitchen worktop fitting cost in Devon?
The figures below are guide prices for Devon, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands | £520–£1,200 |
| Solid wood worktops, supplied and fittedOiled before and after fitting | £930–£1,900 |
| Granite, templated and fittedTemplate visit, cutting, delivery and fitting | £1,500–£3,300 |
| Quartz, templated and fittedTemplate visit, cutting, delivery and fitting | £1,900–£3,600 |
| Old worktops removed and taken awayMore for stone | £80–£260 |
Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.
Kitchens in homes across Devon
You will find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows throughout Devon. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.
Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.
Cob and stone cottages often have walls that are out of true and need breathable finishes, which affects how units and splashbacks are fixed. Seaside bungalows more often need a full replacement with better storage, sometimes with the old dining area opened into the kitchen.
Rules for kitchen worktop fitting in Devon
New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.
Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.
Before you start
- Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.
- Plan the joints: keep laminate joints away from the sink where possible, while stone joints are positioned by the fabricator to suit the slabs.
- Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.
- Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.
- If your Devon kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
- If your Devon home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Questions about kitchen worktop fitting in Devon
How much does kitchen worktop fitting cost in Devon?
Guide prices in Devon are about £520 to £1,200 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Devon?
Yes. We carry out kitchen worktop fitting across Devon, including Plymouth, Exeter, Paignton and Torquay. Every job starts with a free survey visit and an itemised written quote.
How long does it take to fit new worktops?
Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.
How do I look after a solid wood worktop?
Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.
Can I put hot pans on a quartz worktop?
It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.
Kitchen worktop fitting in towns across Devon
Choose a town for local guide prices and postcode coverage:
- Kitchen worktop fitting in Plymouth
- Kitchen worktop fitting in Exeter
- Kitchen worktop fitting in Paignton
- Kitchen worktop fitting in Torquay
- Kitchen worktop fitting in Newton Abbot
- Kitchen worktop fitting in Exmouth
- Kitchen worktop fitting in Barnstaple
- Kitchen worktop fitting in Bideford
- Kitchen worktop fitting in Plymstock
- Kitchen worktop fitting in Tiverton
- Kitchen worktop fitting in Tavistock
- Kitchen worktop fitting in Honiton
- Kitchen worktop fitting in Ilfracombe
- Kitchen worktop fitting in Totnes
- Kitchen worktop fitting in Okehampton