Kitchen worktop fitting in Daventry

Why do people in Daventry choose kitchen worktop fitting?

Solid wood that has blackened around the sink and tap is a common reason people in Daventry ask about replacing their worktops with something new.

When a Daventry kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units. We cover all of Daventry, including the NN11 postcode district, and travel out to neighbouring towns across Northamptonshire.

What is included in the work?

Here is what usually goes into kitchen worktop fitting, adjusted to your Daventry kitchen after we have measured it:

Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Free survey visit to measure the runs and check the base units are level
Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed

Guide prices for kitchen worktop fitting in Daventry

As a starting point for Daventry, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. For the East Midlands, these ranges are close to the national figures.

Guide prices for kitchen worktop fitting in Daventry
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£480–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£870–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,100
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,400
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Kitchens in homes around Daventry

You will find ironstone cottages, Victorian terraces, 1930s semis and post-war new town houses throughout Northamptonshire. Victorian terraces in Northampton and Kettering often have a long galley behind the back room, while post-war houses in Corby tend to have a compact rectangular kitchen.

Water across Northamptonshire is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter is worth considering. Terraced streets with on-street parking can make unloading slow, and village houses on narrow lanes may need a smaller delivery vehicle for long worktops.

Regulations for kitchen work in Daventry

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed ironstone cottages and homes in village conservation areas may need listed building consent or planning permission for new vents or changes to historic fabric.

Getting the most from your kitchen worktop fitting

If your Northamptonshire home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
If your Daventry kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Use trivets for hot pans on every type of worktop; sudden heat can scorch laminate and wood and mark or crack some stone.

Questions about kitchen worktop fitting in Daventry

How much does kitchen worktop fitting cost in Daventry?

Guide prices in Daventry are about £480 to £1,200 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Daventry do you work in?

All of them. Our Northamptonshire coverage takes in the whole of Daventry, including the NN11 postcode district, as well as surrounding towns such as Rugby. If you are unsure, send us your postcode.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Kitchen worktop fitting near Daventry

The same service is available a short drive from Daventry, including: