Kitchen underfloor heating in Yeovil

Is kitchen underfloor heating right for your Yeovil kitchen?

Many Yeovil kitchens lose their only radiator wall to a new run of units, and underfloor heating keeps the room warm without giving up storage.

Kitchen-diners across Somerset often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump. Homes right across Yeovil are covered, as are nearby places such as Sherborne, Glastonbury and the villages in between.

What does kitchen underfloor heating in Yeovil include?

The exact scope is agreed after the survey, but a typical job in Yeovil covers:

Door thresholds and plinth heights checked against the new floor build-up
Plinth heaters fitted under base units where wall space for a radiator is short
A new circuit or fused spur, plus a thermostat with a floor sensor
A survey of the subfloor, open floor area and existing heating system
A heating layout drawn to the kitchen plan, clear of units and appliances
Insulation boards so the floor responds more quickly when the heating comes on

Guide prices for kitchen underfloor heating in Yeovil

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Yeovil kitchen. For the South West, these ranges are close to the national figures.

Guide prices for kitchen underfloor heating in Yeovil
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£620–£1,500
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,500–£4,100
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£260–£620

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Yeovil?

The housing mix across Somerset includes Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, so no two kitchen fits are quite alike. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

Building regulations, electrics and gas in Yeovil

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Planning ahead

Allow extra days in your Yeovil kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
Ask for the finished floor height to be worked out before you order units for your Yeovil kitchen, so plinths and appliances still fit.
Keep rugs light in your Yeovil kitchen-diner; heavy rugs and thick mats hold heat in the floor instead of letting it warm the room.
Make sure your chosen finish suits underfloor heating; vinyl tiles and engineered wood have maximum surface temperatures set by their manufacturers.

Questions about kitchen underfloor heating in Yeovil

How much does kitchen underfloor heating cost in Yeovil?

Guide prices in Yeovil are about £620 to £1,500 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Yeovil do you work in?

All of them. Our Somerset coverage takes in the whole of Yeovil, including the BA20 postcode district, as well as surrounding towns such as Sherborne. If you are unsure, send us your postcode.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Kitchen underfloor heating near Yeovil

We also carry out kitchen underfloor heating in these towns near Yeovil: