Kitchen underfloor heating in Putney

What prompts kitchen underfloor heating in Putney?

Many Putney kitchens lose their only radiator wall to a new run of units, and underfloor heating keeps the room warm without giving up storage.

Homeowners in Putney with a cold solid floor often add insulation boards and electric heating during a refit, so the tiles feel comfortable underfoot in winter. We cover all of Putney, including the SW15 postcode district, and travel out to neighbouring towns across Greater London.

What we cover for kitchen underfloor heating in Putney

Your written quote lists everything included. For kitchen underfloor heating, that normally means:

Electric mats or cables, or wet pipework connected through a manifold
A survey of the subfloor, open floor area and existing heating system
A heating layout drawn to the kitchen plan, clear of units and appliances
Screed, overlay boards or levelling compound, left to cure before finishes
Insulation boards so the floor responds more quickly when the heating comes on
Plinth heaters fitted under base units where wall space for a radiator is short

Guide prices for kitchen underfloor heating in Putney

Typical kitchen underfloor heating prices for homes in Putney, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen underfloor heating in Putney
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£780–£2,000
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£2,000–£5,200
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£320–£780

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Putney homes

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Putney

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Choose your floor finish first and check its maximum surface temperature, as it decides the thermostat setting and the type of system.
Photograph the heating mats or pipes before the floor goes down, so you know where they run if you ever need to drill into it.
If your Putney home has a suspended timber floor, ask how the heating will be supported and insulated between the joists.
Heat is laid only across the open floor, not under fitted units or appliances, so the heated area is smaller than the room.

Questions about kitchen underfloor heating in Putney

How much does kitchen underfloor heating cost in Putney?

Kitchen underfloor heating in Putney typically costs £780 to £2,000 including VAT for electric underfloor heating for a kitchen floor, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Putney as well?

Yes. As well as Putney itself, we cover the rest of Greater London and nearby towns such as Roehampton and Barnes. The process is the same wherever the kitchen is.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Also covering nearby towns

Close to Putney? We cover these nearby towns too: