Kitchen Installers UK

Kitchen underfloor heating · England

Kitchen underfloor heating in Greater Manchester

We carry out kitchen underfloor heating across Greater Manchester, from Manchester to the smaller towns, with a free survey visit and an itemised written quote as standard.

Guide price£240 to £3,800
Towns covered42 towns, including Manchester
Timescale1 to 2 days, then floor finishes once the screed or levelling has cured
An electric underfloor heating mat rolled out over insulation boards on a kitchen floor, ready to be tiled

Why do people in Greater Manchester choose kitchen underfloor heating?

Kitchen-diners across Greater Manchester often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump.

In a compact Greater Manchester kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer.

What does kitchen underfloor heating in Greater Manchester include?

Here is what usually goes into kitchen underfloor heating, adjusted to your Greater Manchester kitchen after we have measured it:

  • A survey of the subfloor, open floor area and existing heating system
  • A heating layout drawn to the kitchen plan, clear of units and appliances
  • Insulation boards so the floor responds more quickly when the heating comes on
  • Electric mats or cables, or wet pipework connected through a manifold
  • A new circuit or fused spur, plus a thermostat with a floor sensor
  • Screed, overlay boards or levelling compound, left to cure before finishes
  • Door thresholds and plinth heights checked against the new floor build-up
  • Plinth heaters fitted under base units where wall space for a radiator is short

How much does kitchen underfloor heating cost in Greater Manchester?

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Costs across the North West tend to sit under UK averages, which these ranges reflect.

How much does kitchen underfloor heating cost in Greater Manchester?
Typical projectGuide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat£570–£1,400
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards£1,400–£3,800
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short£240–£570

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Kitchens in homes across Greater Manchester

You will find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses throughout Greater Manchester. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

A common terrace project is opening the back kitchen into the middle room to make a kitchen-diner. Converted mill and warehouse flats often have open-plan kitchens against exposed brick or concrete, which affects how units, shelves and extraction are fixed.

Rules for kitchen underfloor heating in Greater Manchester

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you start

  • If the floor is small and there is no wall space for a radiator, a plinth heater under a base unit may be simpler.
  • Make sure your chosen finish suits underfloor heating; vinyl tiles and engineered wood have maximum surface temperatures set by their manufacturers.
  • Insulation boards under an electric system help the floor warm up more quickly, especially when it is laid over a cold concrete slab.
  • Check the new floor build-up height early; it affects door thresholds, plinth heights and whether integrated appliances still fit under the worktop.
  • Ask for the finished floor height to be worked out before you order units for your Greater Manchester kitchen, so plinths and appliances still fit.
  • Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Greater Manchester kitchen.

Questions about kitchen underfloor heating in Greater Manchester

How much does kitchen underfloor heating cost in Greater Manchester?

Guide prices in Greater Manchester are about £570 to £1,400 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Greater Manchester?

Yes. We carry out kitchen underfloor heating across Greater Manchester, including Manchester, Oldham, Wigan and Bolton. Every job starts with a free survey visit and an itemised written quote.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Kitchen underfloor heating in towns across Greater Manchester

Choose a town for local guide prices and postcode coverage:

Kitchen underfloor heating in nearby areas

Free survey visit

Book a free survey visit in Greater Manchester

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price