Kitchen underfloor heating in Burgess Hill

Why kitchen underfloor heating for a Burgess Hill home?

Kitchen-diners across West Sussex often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump.

Households in Burgess Hill who spend most of the day in the kitchen often want warmth spread across the floor where people sit, rather than one hot radiator. We work throughout Burgess Hill (RH15) and across the wider West Sussex area.

What does the job involve?

Your written quote lists everything included. For kitchen underfloor heating, that normally means:

Door thresholds and plinth heights checked against the new floor build-up
A survey of the subfloor, open floor area and existing heating system
A new circuit or fused spur, plus a thermostat with a floor sensor
A heating layout drawn to the kitchen plan, clear of units and appliances
Insulation boards so the floor responds more quickly when the heating comes on
Plinth heaters fitted under base units where wall space for a radiator is short

Guide prices for kitchen underfloor heating in Burgess Hill

As a starting point for Burgess Hill, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for kitchen underfloor heating in Burgess Hill
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Kitchens in homes around Burgess Hill

The housing mix across West Sussex includes 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, so no two kitchen fits are quite alike. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Building regulations, electrics and gas in Burgess Hill

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Planning ahead

Allow extra days in your Burgess Hill kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
If your Burgess Hill home has a suspended timber floor, ask how the heating will be supported and insulated between the joists.
Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Burgess Hill kitchen.
Heat is laid only across the open floor, not under fitted units or appliances, so the heated area is smaller than the room.

Questions about kitchen underfloor heating in Burgess Hill

How much does kitchen underfloor heating cost in Burgess Hill?

Guide prices in Burgess Hill are about £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Burgess Hill before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Burgess Hill. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Kitchen underfloor heating in neighbouring towns

Neighbouring towns where we offer kitchen underfloor heating: