Kitchen strip-out and removal in Wilmslow

Is kitchen strip-out and removal right for your Wilmslow kitchen?

When a builder is about to extend or open up a Wilmslow kitchen, the old units, worktops and appliances usually need to come out first so work can start on a clear room.

If a leak has ruined the base units in your Wilmslow kitchen, a careful strip-out lets the floor and walls dry out and be checked before anything new goes in. Kitchens in every part of Wilmslow are covered, and the survey visit is free wherever you are in Cheshire.

What is in a typical job?

Your written quote lists everything included. For kitchen strip-out and removal, that normally means:

Old tiles stripped and walls prepared for plaster, where that is agreed
Kitchen circuits isolated and made safe by an electrician
Gas supply disconnected and capped by a Gas Safe registered engineer
Floors, doorways, stairs and the route to the skip or van protected
Wall units, base units, worktops, sink and appliances removed in order
Waste taken through licensed routes and old appliances sent for recycling

What does kitchen strip-out and removal cost in Wilmslow?

As a starting point for Wilmslow, these ranges include VAT at 20% and allow for typical labour costs in the North West. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What does kitchen strip-out and removal cost in Wilmslow?
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£190–£480
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£280–£660
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£480–£1,100

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Wilmslow?

In and around Wilmslow, homes range across Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door. Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap.

Regulations for kitchen work in Wilmslow

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Getting the most from your kitchen strip-out and removal

If you plan to sell or reuse appliances or units, say so at the survey so they are removed carefully and set aside rather than broken up.
Let neighbours in your Wilmslow terrace or block know when the strip-out is booked; it is a noisy day, and a van or skip may need parking space.
Find your stopcock and gas meter before the day so the plumber and the Gas Safe engineer can isolate supplies in your Wilmslow home quickly.
Leaseholders should check the lease and building rules on working hours, lift use and waste storage before booking a strip-out.

Questions about kitchen strip-out and removal in Wilmslow

How much does kitchen strip-out and removal cost in Wilmslow?

Kitchen strip-out and removal in Wilmslow typically costs £190 to £480 including VAT for removing and disposing of an old kitchen, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Wilmslow as well?

Yes. As well as Wilmslow itself, we cover the rest of Cheshire and nearby towns such as Cheadle Hulme and Hazel Grove. The process is the same wherever the kitchen is.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Where does the old kitchen go after it is removed?

Into licensed waste routes. Units, worktops and packaging go by skip or van with a registered waste carrier to permitted sites, and old appliances go for recycling, which matters most for fridges and freezers because their gases need specialist treatment. Anything you want to keep or sell, such as a working oven, is set aside before the strip-out starts.

Kitchen strip-out and removal in neighbouring towns

We also carry out kitchen strip-out and removal in these towns near Wilmslow: