Kitchen strip-out and removal in Salford

Why do people in Salford choose kitchen strip-out and removal?

If your Salford home was built before 2000, it may contain asbestos in textured ceilings, old floor tiles or under an old steel sink, so a planned strip-out matters more than speed.

When a builder is about to extend or open up a Salford kitchen, the old units, worktops and appliances usually need to come out first so work can start on a clear room. We cover all of Salford, including the M5, M6 and M50 postcode districts, and travel out to neighbouring towns across Greater Manchester.

What does the job involve?

After the survey visit we write the scope down. For kitchen strip-out and removal in Salford it usually covers:

Old tiles stripped and walls prepared for plaster, where that is agreed
Water isolated and supplies capped so the rest of the house keeps running water
Kitchen circuits isolated and made safe by an electrician
Gas supply disconnected and capped by a Gas Safe registered engineer
Waste taken through licensed routes and old appliances sent for recycling
Wall units, base units, worktops, sink and appliances removed in order

Guide prices for kitchen strip-out and removal in Salford

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for kitchen strip-out and removal in Salford
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£190–£480
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£280–£660
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£480–£1,100

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

House types around Salford and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses throughout Greater Manchester. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Salford

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Planning ahead

Set up a kettle and microwave in another room of your home in Greater Manchester, as the kitchen will have no power once the circuits are made safe.
Find your stopcock and gas meter before the day so the plumber and the Gas Safe engineer can isolate supplies in your Salford home quickly.
Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Decide what is being kept, such as a working oven or units for a garage, and label it clearly before the strip-out day.

Questions about kitchen strip-out and removal in Salford

How much does kitchen strip-out and removal cost in Salford?

Kitchen strip-out and removal in Salford typically costs £190 to £480 including VAT for removing and disposing of an old kitchen, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Salford?

Yes. We work across Salford, including the M5, M6 and M50 postcode districts, and nearby towns such as Eccles and Manchester. Book a free survey visit and we will arrange a time that suits you.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Where does the old kitchen go after it is removed?

Into licensed waste routes. Units, worktops and packaging go by skip or van with a registered waste carrier to permitted sites, and old appliances go for recycling, which matters most for fridges and freezers because their gases need specialist treatment. Anything you want to keep or sell, such as a working oven, is set aside before the strip-out starts.

Kitchen strip-out and removal in neighbouring towns

Neighbouring towns where we offer kitchen strip-out and removal: