Kitchen strip-out and removal in Nailsea

Thinking about kitchen strip-out and removal in Nailsea?

When a builder is about to extend or open up a Nailsea kitchen, the old units, worktops and appliances usually need to come out first so work can start on a clear room.

Some Nailsea households are fitting a new kitchen themselves and want the heavy, messy part done by others, with gas capped and circuits made safe before they begin. We work throughout Nailsea (BS20, BS21 and BS48) and across the wider Somerset area.

What does kitchen strip-out and removal in Nailsea include?

Here is what usually goes into kitchen strip-out and removal, adjusted to your Nailsea kitchen after we have measured it:

Gas supply disconnected and capped by a Gas Safe registered engineer
Old tiles stripped and walls prepared for plaster, where that is agreed
Wall units, base units, worktops, sink and appliances removed in order
Waste taken through licensed routes and old appliances sent for recycling
Survey of gas, electrical and water positions and the route out of the house
Floors, doorways, stairs and the route to the skip or van protected

Guide prices for kitchen strip-out and removal in Nailsea

The figures below are guide prices for Nailsea, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.

Guide prices for kitchen strip-out and removal in Nailsea
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£210–£520
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£310–£720
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£520–£1,200

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

House types around Nailsea and what they mean for a kitchen

In and around Nailsea, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

Building regulations, electrics and gas in Nailsea

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Planning ahead

If a skip will need to sit on the road outside your Nailsea home, speak to the skip firm early, as a permit usually has to be arranged first.
Find your stopcock and gas meter before the day so the plumber and the Gas Safe engineer can isolate supplies in your Nailsea home quickly.
If you plan to sell or reuse appliances or units, say so at the survey so they are removed carefully and set aside rather than broken up.
Line up the new kitchen soon after the strip-out, as the room stays without a cooker or sink until the services are reconnected.

Questions about kitchen strip-out and removal in Nailsea

How much does kitchen strip-out and removal cost in Nailsea?

Kitchen strip-out and removal in Nailsea typically costs £210 to £520 including VAT for removing and disposing of an old kitchen, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Nailsea do you work in?

All of them. Our Somerset coverage takes in the whole of Nailsea, including the BS20, BS21 and BS48 postcode districts, as well as surrounding towns such as Portishead. If you are unsure, send us your postcode.

What happens if asbestos is found during a kitchen strip-out?

Work in that area stops. Homes built before 2000 may contain asbestos in textured ceiling coatings, old floor tiles, some boiler cupboard boards and the bitumen pads under old steel sinks. Suspect material is sampled and tested by a specialist, and if it does contain asbestos it is removed by a specialist contractor under the asbestos regulations before the strip-out carries on.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Kitchen strip-out and removal near Nailsea

Neighbouring towns where we offer kitchen strip-out and removal: