Kitchen strip-out and removal in Edmonton

Is kitchen strip-out and removal right for your Edmonton kitchen?

If a leak has ruined the base units in your Edmonton kitchen, a careful strip-out lets the floor and walls dry out and be checked before anything new goes in.

In a flat in Edmonton, removing a kitchen means planning the route out through shared stairs or lifts, protecting common areas and keeping to the building's working hours. Kitchens in every part of Edmonton are covered, and the survey visit is free wherever you are in Greater London.

What does kitchen strip-out and removal in Edmonton include?

Here is what usually goes into kitchen strip-out and removal, adjusted to your Edmonton kitchen after we have measured it:

Wall units, base units, worktops, sink and appliances removed in order
Water isolated and supplies capped so the rest of the house keeps running water
Waste taken through licensed routes and old appliances sent for recycling
Old tiles stripped and walls prepared for plaster, where that is agreed
Floors, doorways, stairs and the route to the skip or van protected
Gas supply disconnected and capped by a Gas Safe registered engineer

Guide prices for kitchen strip-out and removal in Edmonton

The figures below are guide prices for Edmonton, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen strip-out and removal in Edmonton
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£260–£650
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£390–£910
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£650–£1,600

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

House types around Edmonton and what they mean for a kitchen

In and around Edmonton, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for kitchen strip-out and removal in Edmonton?

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Set up a kettle and microwave in another room of your home in Greater London, as the kitchen will have no power once the circuits are made safe.
If a skip will need to sit on the road outside your Edmonton home, speak to the skip firm early, as a permit usually has to be arranged first.
Let neighbours in your Edmonton terrace or block know when the strip-out is booked; it is a noisy day, and a van or skip may need parking space.
Leaseholders should check the lease and building rules on working hours, lift use and waste storage before booking a strip-out.

Questions about kitchen strip-out and removal in Edmonton

How much does kitchen strip-out and removal cost in Edmonton?

Guide prices in Edmonton are about £260 to £650 including VAT for removing and disposing of an old kitchen. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Edmonton do you work in?

All of them. Our Greater London coverage takes in the whole of Edmonton, including the N18 postcode district, as well as surrounding towns such as Tottenham. If you are unsure, send us your postcode.

Where does the old kitchen go after it is removed?

Into licensed waste routes. Units, worktops and packaging go by skip or van with a registered waste carrier to permitted sites, and old appliances go for recycling, which matters most for fridges and freezers because their gases need specialist treatment. Anything you want to keep or sell, such as a working oven, is set aside before the strip-out starts.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Kitchen strip-out and removal near Edmonton

Close to Edmonton? We cover these nearby towns too: