Kitchen strip-out and removal in Chester

Is kitchen strip-out and removal right for your Chester kitchen?

When a builder is about to extend or open up a Chester kitchen, the old units, worktops and appliances usually need to come out first so work can start on a clear room.

In a flat in Chester, removing a kitchen means planning the route out through shared stairs or lifts, protecting common areas and keeping to the building's working hours. If your home is in Chester or close by in Ellesmere Port or Garston, the same survey, quote and fitting process applies.

What we cover for kitchen strip-out and removal in Chester

After the survey visit we write the scope down. For kitchen strip-out and removal in Chester it usually covers:

Kitchen circuits isolated and made safe by an electrician
Gas supply disconnected and capped by a Gas Safe registered engineer
Floors, doorways, stairs and the route to the skip or van protected
Waste taken through licensed routes and old appliances sent for recycling
Wall units, base units, worktops, sink and appliances removed in order
Survey of gas, electrical and water positions and the route out of the house

What should you budget for kitchen strip-out and removal in Chester?

Typical kitchen strip-out and removal prices for homes in Chester, including VAT and adjusted for the North West. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for kitchen strip-out and removal in Chester?
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£190–£480
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£280–£660
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£480–£1,100

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

House types around Chester and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages throughout Cheshire. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door. Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap.

Regulations for kitchen work in Chester

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Tips before you start

Find your stopcock and gas meter before the day so the plumber and the Gas Safe engineer can isolate supplies in your Chester home quickly.
Measure the hallway and doors on the route out; long worktops and tall larder units sometimes need cutting down to leave the house without damaging walls.
Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Leaseholders should check the lease and building rules on working hours, lift use and waste storage before booking a strip-out.

Questions about kitchen strip-out and removal in Chester

How much does kitchen strip-out and removal cost in Chester?

Guide prices in Chester are about £190 to £480 including VAT for removing and disposing of an old kitchen. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Chester do you work in?

All of them. Our Cheshire coverage takes in the whole of Chester, including the CH1 postcode district, as well as surrounding towns such as Ellesmere Port. If you are unsure, send us your postcode.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

What happens if asbestos is found during a kitchen strip-out?

Work in that area stops. Homes built before 2000 may contain asbestos in textured ceiling coatings, old floor tiles, some boiler cupboard boards and the bitumen pads under old steel sinks. Suspect material is sampled and tested by a specialist, and if it does contain asbestos it is removed by a specialist contractor under the asbestos regulations before the strip-out carries on.

Also covering nearby towns

We also carry out kitchen strip-out and removal in these towns near Chester: