Kitchen strip-out and removal in Bridgwater

When does kitchen strip-out and removal make sense in Bridgwater?

If a leak has ruined the base units in your Bridgwater kitchen, a careful strip-out lets the floor and walls dry out and be checked before anything new goes in.

When a builder is about to extend or open up a Bridgwater kitchen, the old units, worktops and appliances usually need to come out first so work can start on a clear room. We cover all of Bridgwater, including the TA6 postcode district, and travel out to neighbouring towns across Somerset.

What we cover for kitchen strip-out and removal in Bridgwater

The exact scope is agreed after the survey, but a typical job in Bridgwater covers:

Gas supply disconnected and capped by a Gas Safe registered engineer
Waste taken through licensed routes and old appliances sent for recycling
Wall units, base units, worktops, sink and appliances removed in order
Water isolated and supplies capped so the rest of the house keeps running water
Floors, doorways, stairs and the route to the skip or van protected
Kitchen circuits isolated and made safe by an electrician

Kitchen strip-out and removal prices in Bridgwater

As a starting point for Bridgwater, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

Kitchen strip-out and removal prices in Bridgwater
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£210–£520
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£310–£720
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£520–£1,200

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Bridgwater?

In and around Bridgwater, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Do you need approval for kitchen strip-out and removal in Bridgwater?

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Planning ahead

Measure the hallway and doors on the route out; long worktops and tall larder units sometimes need cutting down to leave the house without damaging walls.
Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Set up a kettle and microwave in another room of your home in Somerset, as the kitchen will have no power once the circuits are made safe.
Old steel sinks sometimes have bitumen sound-deadening pads underneath, which may contain asbestos and should be tested before the sink is broken up.

Questions about kitchen strip-out and removal in Bridgwater

How much does kitchen strip-out and removal cost in Bridgwater?

Kitchen strip-out and removal in Bridgwater typically costs £210 to £520 including VAT for removing and disposing of an old kitchen, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Bridgwater?

Yes. We work across Bridgwater, including the TA6 postcode district, and nearby towns such as Burnham-on-Sea and Taunton. Book a free survey visit and we will arrange a time that suits you.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Kitchen strip-out and removal near Bridgwater

Close to Bridgwater? We cover these nearby towns too: