Kitchen Installers UK

Splashbacks and tiling · England

Splashbacks and tiling in Suffolk

Splashbacks and tiling in Suffolk start with a free visit to measure up, then a written scope and quote before any work begins.

Guide price£160 to £860
Towns covered10 towns, including Ipswich
Timescale1 to 2 days
A tiler setting white metro tiles as a splashback between a new worktop and the wall units above

Why do people in Suffolk choose splashbacks and tiling?

If the units in your Suffolk kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

If your Suffolk home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

What do splashbacks and tiling in Suffolk include?

Here is what usually goes into splashbacks and tiling, adjusted to your Suffolk kitchen after we have measured it:

  • Free survey visit to check the walls, agree the layout and give an itemised quote
  • Old tiles removed and walls prepared, patched or boarded where needed
  • Tiled splashbacks between the worktop and wall units, set out from a centre line
  • Full-height or feature tiling behind the hob, sink or open shelving
  • Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
  • Stone upstands and splashbacks templated and fitted alongside a stone worktop
  • Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
  • Socket and switch plates refitted by an electrician once the tiling is finished

How much do splashbacks and tiling cost in Suffolk?

Use these ranges to plan your budget. They include VAT, reflect costs in the East of England, and are firmed up once we have seen your Suffolk kitchen. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.

How much do splashbacks and tiling cost in Suffolk?
Typical projectGuide price
Tiled splashbackBetween worktop and wall units£160–£430
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting£320–£860
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in£270–£650
Stone upstands and splashbacksTemplated with the worktopPriced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes across Suffolk

Across Suffolk you will often find timber-framed cottages, Victorian terraces, post-war estate houses and seaside bungalows, and each shapes the kitchen differently. Timber-framed cottages often have a small kitchen in a rear lean-to, while Victorian terraces in Ipswich and Lowestoft tend to have a narrow galley at the back.

Suffolk has hard water across most of the county, so limescale on taps, kettles and boiling water taps is common and a softener or filter can help. Rural lanes and farm tracks can be narrow for delivery lorries, while town terraces may have limited parking and no rear access for long worktops.

In a timber-framed cottage, uneven floors, low beams and out-of-square walls usually shape the layout and the choice of units, and some owners mix in freestanding pieces. Estate houses and bungalows more often need a practical replacement with more storage, better lighting and easy-clean surfaces.

Rules for splashbacks and tiling in Suffolk

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Many timber-framed cottages are listed, and market towns and villages often have conservation areas, so a new external vent or changes to historic features may need consent.

Before you start

  • Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
  • Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
  • Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
  • Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
  • Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
  • If your Suffolk kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.

Questions about splashbacks and tiling in Suffolk

How much do splashbacks and tiling cost in Suffolk?

Guide prices in Suffolk are about £160 to £430 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Suffolk?

Yes. We carry out splashbacks and tiling across Suffolk, including Ipswich, Lowestoft, Bury St Edmunds and Haverhill. Every job starts with a free survey visit and an itemised written quote.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Splashbacks and tiling in towns across Suffolk

Choose a town for local guide prices and postcode coverage:

Splashbacks and tiling in nearby areas

Free survey visit

Book a free survey visit in Suffolk

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price