Splashbacks and tiling in Sandown

Thinking about splashbacks and tiling in Sandown?

Homeowners in Sandown often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

Landlords around the Isle of Wight often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. If your home is in Sandown or close by in Ryde or Newport, Isle of Wight, the same survey, quote and fitting process applies.

What we cover for splashbacks and tiling in Sandown

The exact scope is agreed after the survey, but a typical job in Sandown covers:

Socket and switch plates refitted by an electrician once the tiling is finished
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Full-height or feature tiling behind the hob, sink or open shelving
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Free survey visit to check the walls, agree the layout and give an itemised quote

Splashbacks and tiling prices in Sandown

The figures below are guide prices for Sandown, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Splashbacks and tiling prices in Sandown
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Sandown homes

You will find Victorian seaside villas, stone cottages, post-war bungalows and converted flats throughout the Isle of Wight. Victorian villas split into flats often have compact kitchens in former bedrooms, while bungalows and cottages tend to have small square kitchens at the back.

Kitchen units, worktops and appliances usually cross on the vehicle ferry, so delivery dates and crossing times need planning before the fit is booked. Mains water on the Isle of Wight is hard, so limescale on taps, kettles and boiling water taps is common and a filter can help.

What rules apply to splashbacks and tiling in Sandown?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed buildings and conservation areas in the older island towns may need consent for a new external vent, and flat owners usually need the freeholder's written consent.

Planning ahead

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Hold a few of your chosen tiles against the wall in your Sandown kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Choosing stone worktops for a Sandown kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Sandown

How much do splashbacks and tiling cost in Sandown?

For a tiled splashback, budget around £170 to £460 including VAT in Sandown. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Sandown do you work in?

All of them. Our Isle of Wight coverage takes in the whole of Sandown, including the PO36 postcode district, as well as surrounding towns such as Ryde. If you are unsure, send us your postcode.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Also covering nearby towns

Close to Sandown? We cover these nearby towns too: