Splashbacks and tiling in Rottingdean

Who usually needs splashbacks and tiling in Rottingdean?

Homeowners in Rottingdean often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

If the kitchen in your Rottingdean home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. We work throughout Rottingdean (BN2 and BN51) and across the wider East Sussex area.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Rottingdean kitchen after we have measured it:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Old tiles removed and walls prepared, patched or boarded where needed
Tiled splashbacks between the worktop and wall units, set out from a centre line

Guide prices for splashbacks and tiling in Rottingdean

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for splashbacks and tiling in Rottingdean
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

You will find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows throughout East Sussex. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.

Regulations for kitchen work in Rottingdean

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Planning ahead

If your East Sussex kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Ask to see where the tiling will start before the first row goes on in your Rottingdean kitchen, so narrow cut tiles end up in corners rather than on show.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Rottingdean home, as cutting dust and adhesive travel further than you expect.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Rottingdean

How much do splashbacks and tiling cost in Rottingdean?

Guide prices in Rottingdean are about £170 to £460 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Rottingdean before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Rottingdean. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Nearby places we cover

Close to Rottingdean? We cover these nearby towns too: