Splashbacks and tiling in Plumstead

What prompts splashbacks and tiling in Plumstead?

If the units in your Plumstead kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

When a Plumstead kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit. Homes right across Plumstead are covered, as are nearby places such as Abbey Wood, Welling and the villages in between.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Plumstead covers:

Full-height or feature tiling behind the hob, sink or open shelving
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Tiled splashbacks between the worktop and wall units, set out from a centre line
Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

What should you budget for splashbacks and tiling in Plumstead?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for splashbacks and tiling in Plumstead?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£200–£520
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£390–£1,000
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£320–£780
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Plumstead

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to splashbacks and tiling in Plumstead?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Plumstead home, as cutting dust and adhesive travel further than you expect.
If you are renting out a flat in Plumstead, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Ask to see where the tiling will start before the first row goes on in your Plumstead kitchen, so narrow cut tiles end up in corners rather than on show.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Plumstead

How much do splashbacks and tiling cost in Plumstead?

Splashbacks and tiling in Plumstead typically cost £200 to £520 including VAT for a tiled splashback, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Plumstead before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Plumstead. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Also covering nearby towns

Neighbouring towns where we offer splashbacks and tiling: