Splashbacks and tiling in Launceston

Why do people in Launceston choose splashbacks and tiling?

If the units in your Launceston kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Many people in Cornwall choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease. If your home is in Launceston or close by in Tavistock or Liskeard, the same survey, quote and fitting process applies.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Socket and switch plates refitted by an electrician once the tiling is finished
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Tiled splashbacks between the worktop and wall units, set out from a centre line
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed

What should you budget for splashbacks and tiling in Launceston?

As a starting point for Launceston, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.

What should you budget for splashbacks and tiling in Launceston?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£410
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£310–£820
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£260–£620
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Launceston?

In and around Launceston, homes range across granite and slate cottages, Victorian terraces, post-war bungalows and converted barns. Older stone cottages often have a small, low-ceilinged kitchen with uneven walls, while post-war bungalows tend to have a square kitchen beside a separate dining area.

Narrow lanes, steep harbour streets and cottages with no parking outside can make delivering long worktops tricky, so delivery day needs planning in advance. Mains water across most of Cornwall is soft, which is kinder to taps and appliances, so heavy limescale build-up is rarely a problem.

What rules apply to splashbacks and tiling in Launceston?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Where a cottage is listed or sits in one of the many harbour-town conservation areas, consent may be needed before a new extractor vent is cut through an outside wall.

Practical advice for Launceston homeowners

Ask to see where the tiling will start before the first row goes on in your Launceston kitchen, so narrow cut tiles end up in corners rather than on show.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
If you are renting out a flat in Launceston, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Launceston

How much do splashbacks and tiling cost in Launceston?

Guide prices in Launceston are about £150 to £410 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Launceston before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Launceston. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Nearby places we cover

Neighbouring towns where we offer splashbacks and tiling: