Splashbacks and tiling in Kingswood

Is splashbacks and tiling right for your Kingswood kitchen?

If the units in your Kingswood kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Homeowners in Kingswood often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Our Gloucestershire coverage reaches every part of Kingswood (BS15) and out towards Keynsham.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Kingswood kitchen after we have measured it:

Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Tiled splashbacks between the worktop and wall units, set out from a centre line
Socket and switch plates refitted by an electrician once the tiling is finished

Splashbacks and tiling prices in Kingswood

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. For the South West, these ranges are close to the national figures.

Splashbacks and tiling prices in Kingswood
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£410
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£310–£820
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£260–£620
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Kingswood homes

Across Gloucestershire you will often find cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses, and each shapes the kitchen differently. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs. Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap.

Do you need approval for splashbacks and tiling in Kingswood?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Getting the most from your splashbacks and tiling

Ask to see where the tiling will start before the first row goes on in your Kingswood kitchen, so narrow cut tiles end up in corners rather than on show.
If you are renting out a flat in Kingswood, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
If your Gloucestershire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Kingswood

How much do splashbacks and tiling cost in Kingswood?

Guide prices in Kingswood are about £150 to £410 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Kingswood before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Kingswood. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Splashbacks and tiling near Kingswood

The same service is available a short drive from Kingswood, including: