Splashbacks and tiling · Kent
Splashbacks and tiling in Hythe, Kent
We take on splashbacks and tiling in Hythe, Kent and the surrounding CT21 postcodes, working to a written scope so you know exactly what is included before anyone starts.
Why splashbacks and tiling for a Hythe, Kent home?
When a Hythe, Kent kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.
Homeowners in Hythe, Kent often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. We cover all of Hythe, Kent, including the CT21 postcode district, and travel out to neighbouring towns across Kent.
What is in a typical job?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Full-height or feature tiling behind the hob, sink or open shelving
How much do splashbacks and tiling cost in Hythe, Kent?
The figures below are guide prices for Hythe, Kent, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £170–£460 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £340–£920 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £290–£690 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
What kind of kitchens do we fit in Hythe, Kent?
In and around Hythe, Kent, homes range across Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.
Building regulations, electrics and gas in Hythe, Kent
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Practical advice for Hythe, Kent homeowners
- Ask to see where the tiling will start before the first row goes on in your Hythe, Kent kitchen, so narrow cut tiles end up in corners rather than on show.
- Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
- Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
- Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
Questions about splashbacks and tiling in Hythe, Kent
How much do splashbacks and tiling cost in Hythe, Kent?
For a tiled splashback, budget around £170 to £460 including VAT in Hythe, Kent. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you cover all of Hythe, Kent?
Yes. We work across Hythe, Kent, including the CT21 postcode district, and nearby towns such as Folkestone and Ashford, Kent. Book a free survey visit and we will arrange a time that suits you.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Can you tile over existing kitchen tiles?
Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.
Splashbacks and tiling near Hythe, Kent
Close to Hythe, Kent? We cover these nearby towns too:
- Splashbacks and tiling in Folkestone
- Splashbacks and tiling in Ashford, Kent
- Splashbacks and tiling in Dover
- Splashbacks and tiling in Canterbury
- Splashbacks and tiling in Tenterden
- Splashbacks and tiling in Deal
- Splashbacks and tiling across Kent