Splashbacks and tiling in Failsworth

Thinking about splashbacks and tiling in Failsworth?

Homeowners in Failsworth often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

Some households in Greater Manchester want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. We cover all of Failsworth, including the M35 postcode district, and travel out to neighbouring towns across Greater Manchester.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Full-height or feature tiling behind the hob, sink or open shelving
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Free survey visit to check the walls, agree the layout and give an itemised quote

What should you budget for splashbacks and tiling in Failsworth?

The figures below are guide prices for Failsworth, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Costs across the North West tend to sit under UK averages, which these ranges reflect.

What should you budget for splashbacks and tiling in Failsworth?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Greater Manchester includes Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, so no two kitchen fits are quite alike. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

Regulations for kitchen work in Failsworth

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Planning ahead

If you are renting out a flat in Failsworth, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
If your Greater Manchester kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Choosing stone worktops for a Failsworth kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Failsworth

How much do splashbacks and tiling cost in Failsworth?

Guide prices in Failsworth are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Failsworth as well?

Yes. As well as Failsworth itself, we cover the rest of Greater Manchester and nearby towns such as Droylsden and Ashton-under-Lyne. The process is the same wherever the kitchen is.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Also covering nearby towns

Close to Failsworth? We cover these nearby towns too: