Splashbacks and tiling in Cromer

What prompts splashbacks and tiling in Cromer?

Homeowners in Cromer often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

If your Cromer home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. Kitchens in every part of Cromer are covered, and the survey visit is free wherever you are in Norfolk.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Cromer kitchen after we have measured it:

Free survey visit to check the walls, agree the layout and give an itemised quote
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed
Full-height or feature tiling behind the hob, sink or open shelving

Splashbacks and tiling prices in Cromer

The figures below are guide prices for Cromer, including VAT and adjusted for typical costs across the East of England. The fixed price comes after we have measured up. Prices in the East of England usually run above the national guide, mainly because labour and parking cost more.

Splashbacks and tiling prices in Cromer
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£160–£430
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£320–£860
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£270–£650
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Cromer homes

Across Norfolk you will often find flint and brick cottages, Victorian terraces, post-war bungalows and converted barns, and each shapes the kitchen differently. Flint and brick cottages often have a small kitchen in a rear lean-to, while bungalows across the county usually have a square kitchen beside a separate dining room.

Norfolk's water is hard across most of the county, so limescale on taps and boiling water taps is common and a softener or filter can help. Rural roads, farm tracks and narrow coastal village streets can restrict delivery lorries, so long worktops may need a smaller vehicle or a planned drop-off.

Do you need approval for splashbacks and tiling in Cromer?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes within the Broads, listed cottages and conservation areas in market towns and coastal villages may need consent for a new external vent or alterations to historic features.

Planning ahead

If you are renting out a flat in Cromer, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Hold a few of your chosen tiles against the wall in your Cromer kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.

Questions about splashbacks and tiling in Cromer

How much do splashbacks and tiling cost in Cromer?

Splashbacks and tiling in Cromer typically cost £160 to £430 including VAT for a tiled splashback, based on prices in the East of England. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Cromer do you work in?

All of them. Our Norfolk coverage takes in the whole of Cromer, including the NR27 postcode district, as well as surrounding towns such as Norwich. If you are unsure, send us your postcode.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Nearby places we cover

The same service is available a short drive from Cromer, including: